On Sun, 12 Feb 2012, Rugxulo wrote: > Hi, > > On Sun, Feb 12, 2012 at 9:18 AM, Bernd Blaauw <bbla...@home.nl> wrote: >> Op 12-2-2012 16:07, kqt4a...@gmail.com schreef: >> >>> I got a boot floppy and ran fdisk on the harddrive followed by format c: /s >>> /u >>> When I try to boot from the hd I get "FreeDOS" and the floppy drive light >>> comes on >>> How do configure it to point to the hd > > Did you do "SYS A: C:" afterwards? (If that doesn't work, it's > probably a bug.) And yes, your FAT partition must be primary and > active. Also, make sure you remove the floppy from the drive when you > want to boot from HD or else the BIOS will choose that first > (apparently). >
I took a different approach I downloaded the latest iso, moved the Tandy harddrive to a pc, and installed Now I have the Tandy up on FreeDOS One itch to scratch is when I run dir I get "Press any key to continue" after every single line Next I have a "Intel 8/18TP Lan Adapter" and I have no idea how to go about setting up networking on dos I have spent 18 years working on UNIX Richard ------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
