I have been working with a user on a BMC config issue with their machine. I'm now disinclined to support the committing of a default template.
1) Many different machines support different configuration options. Included in this are: ipmi 1.5 only options vs ipmi 2.0 options vs. optionally supported options vs. newer errata options vs. flat out unsupported options. So do we support the full template (so most options will fail by default) or do we support a minimal template (most options aren't listed). 2) Due to the IP address and MAC address being required for modification (and likely subnet + gateway too), at minimum, the user must edit the template anyways, we cannot create a default template that will work without modification. I think the better idea is to store a template in the docs location and mention it in the bmc-config manpage. I have also written into the bmc- config manpage some general use instructions, so they know they should run --checkout to create a config template first. Any thoughts? Al On Fri, 2007-08-17 at 11:18 -0700, Anand Babu Periasamy wrote: > Hi Al, > I am thinking, if we produce $prefix/etc/freeipmi/bmc-config.conf with > fully documented options and default values, bmc-autoconfig's goal can > be achieved. Additionally it can be used for automation too. > bmc-config will use this config file if none is specified through the > command line argument. Then we can get rid of bmc-autoconfig. What do > you think? > > Al Chu writes: > > > I just thought of this. We could also distribute a common template file > > as part of FreeIPMI and install it in the docs dir? I guess my semi- > > argument against this is the fact that we've (practically) already > > distributed a template file with the bmc-config.conf(5) manpage. So > > would there be a need? > > > > What are people's thoughts? > > > > Al > > > > On Tue, 2007-08-14 at 11:01 -0700, Peter Broadwell wrote: > >> I have need to configure many machines at the same time and if the > >> templateing > >> file was documented this tool might become the one of choice for such uses. > >> > >> ;;peter > >> > >> > >> Anand Babu Periasamy wrote: > >> > Hi Al, > >> > * It is still maintained. > >> > * BMC-Autoconfig is not a GUI wizard for bmc-config. It is supposed to > >> > ask minimum questions from the user and automatically configure the > >> > BMC with known defaults. It is intended for users without any > >> > knowledge of IPMI to quickly get a basic working setup. > >> > > >> > * It does enable LAN and configure NULL, admin, operator and ipmiuser > >> > accounts. See the template file, you will get an idea what all it > >> > configures. > >> > If you have suggestions to improve, let us know? > >> > > >> > Albert Chu writes: > >> > > >> >> I'm thinking of dropping this from FreeIPMI: > >> >> > >> >> A) It doesn't seem to be maintained by the original authors. > >> >> > >> >> B) It apparenly only configures 3 fields of the BMC. No users, lan > >> >> enabling, etc. > >> >> > >> >> I don't really see the use anymore. Any comments? Anyone out there > >> >> using > >> >> this? > >> >> > >> >> Al > >> >> > >> >> -- > >> > > > -- > > Albert Chu > > [EMAIL PROTECTED] > > 925-422-5311 > > Computer Scientist > > High Performance Systems Division > > Lawrence Livermore National Laboratory > -- Albert Chu [EMAIL PROTECTED] 925-422-5311 Computer Scientist High Performance Systems Division Lawrence Livermore National Laboratory _______________________________________________ Freeipmi-devel mailing list Freeipmiemail@example.com http://lists.gnu.org/mailman/listinfo/freeipmi-devel