Hi,

        Can you please tell the step to upgrade or any link on net? What is 
latest 
firmware version and where to find it.
1 more thing. Is that normal behavior of ipmi
# /usr/local/sbin/ipmi-sel
ipmi-sel: unable to get SEL record

From bmc-info, I have

Device ID:         20
Device Revision:   0
Firmware Revision: 14.64
                   [Device Available (normal operation)]
IPMI Version:      2.0
Additional Device Support:
                   [Sensor Device]
                   [SDR Repository Device]
                   [SEL Device]
                   [FRU Inventory Device]
                   [IPMB Event Receiver]
                   [IPMB Event Generator]
                   [Bridge]
Manufacturer ID:   878h
Product ID:        0h
Aux Firmware Revision Info: 0h
.
.... then channel info

I have less knowledge regarding h/w kinda things.

Thanks
Sharad Chandra


On Friday 12 October 2007 4:03 pm, Anand Babu Periasamy wrote:
> Hmm.. it looks like your sensor data repository (SDR) itself
> has only few entries. It is possible that your IPMI BMC only
> supports basic sensors, or you will need a SDR firmware update.
>
> --
> Anand Babu Periasamy.
>
> Sharad Chandra writes:
> > [EMAIL PROTECTED] ~]# /usr/local/sbin/ipmi-sensors
> > 22273: CPU 1 (Temperature): 0.00 C (NA/78.00): [OK]
> > 22274: CPU 2 (Temperature): 0.00 C (NA/78.00): [OK]
> > 22275: SYSTEM (Temperature): 0.00 C (NA/83.00): [OK]
> > 22276: 3.3V (Voltage): 0.00 V (0.00/0.00): [OK]
> > 22278: 5V (Voltage): 0.00 V (0.00/0.00): [OK]
> > 22279: 12V (Voltage): 0.00 V (0.00/0.00): [OK]
> > 22280: -12V (Voltage): 105.00 V (0.00/0.00): [OK]
> > 22281: Fan1 (Fan): 11.00 RPM (0.00/NA): [OK]
> > 22282: Fan2 (Fan): 83.00 RPM (0.00/NA): [OK]
> > 22283: Fan3 (Fan): 0.00 RPM (0.00/NA): [OK]
> > 22284: Fan4 (Fan): 26.00 RPM (0.00/NA): [OK]
> > 22285: Fan5 (Fan): 26.00 RPM (0.00/NA): [OK]
> > 22286: Fan6 (Fan): 0.00 RPM (0.00/NA): [OK]
> > 22287: Fan7 (Fan): 0.00 RPM (0.00/NA): [OK]
> > 22288: Fan8 (Fan): 0.00 RPM (0.00/NA): [OK]
> > 22289: Intrusion (Platform Chassis Intrusion): [General Chassis
> > Intrusion] 22290: Power Supply (Power Supply): [Power Supply Failure
> > detected] [EMAIL PROTECTED] ~]#
> >
> >> Hi Sharad, Can you please post the full output without -g option?
> >
> > Sharad Chandra


_______________________________________________
Freeipmi-devel mailing list
Freeipmi-devel@gnu.org
http://lists.gnu.org/mailman/listinfo/freeipmi-devel

Reply via email to