Hmm.. it looks like your sensor data repository (SDR) itself
has only few entries. It is possible that your IPMI BMC only
supports basic sensors, or you will need a SDR firmware update.
--
Anand Babu Periasamy.
Sharad Chandra writes:
[EMAIL PROTECTED] ~]# /usr/local/sbin/ipmi-sensors
22273: CPU 1 (Temperature): 0.00 C (NA/78.00): [OK]
22274: CPU 2 (Temperature): 0.00 C (NA/78.00): [OK]
22275: SYSTEM (Temperature): 0.00 C (NA/83.00): [OK]
22276: 3.3V (Voltage): 0.00 V (0.00/0.00): [OK]
22278: 5V (Voltage): 0.00 V (0.00/0.00): [OK]
22279: 12V (Voltage): 0.00 V (0.00/0.00): [OK]
22280: -12V (Voltage): 105.00 V (0.00/0.00): [OK]
22281: Fan1 (Fan): 11.00 RPM (0.00/NA): [OK]
22282: Fan2 (Fan): 83.00 RPM (0.00/NA): [OK]
22283: Fan3 (Fan): 0.00 RPM (0.00/NA): [OK]
22284: Fan4 (Fan): 26.00 RPM (0.00/NA): [OK]
22285: Fan5 (Fan): 26.00 RPM (0.00/NA): [OK]
22286: Fan6 (Fan): 0.00 RPM (0.00/NA): [OK]
22287: Fan7 (Fan): 0.00 RPM (0.00/NA): [OK]
22288: Fan8 (Fan): 0.00 RPM (0.00/NA): [OK]
22289: Intrusion (Platform Chassis Intrusion): [General Chassis Intrusion]
22290: Power Supply (Power Supply): [Power Supply Failure detected]
[EMAIL PROTECTED] ~]#
Hi Sharad, Can you please post the full output without -g option?
Sharad Chandra
_______________________________________________
Freeipmi-devel mailing list
Freeipmi-devel@gnu.org
http://lists.gnu.org/mailman/listinfo/freeipmi-devel
