Hmmm.  AFAIK, the 47488 IANA number was assigned to WinBond, so I believe the 
firmware vendor should be WinBond, but the system vendor in this case is 
SuperMicro, using the WinBond BMC.  SuperMicro has used 4 different BMC vendors 
over time, by my count.

However, the iana.org site has not posted this number, so that would be the 
official arbiter of the vendor name, when it is registered/posted.

Andy

-----Original Message-----
From: [email protected] 
[mailto:[email protected]] On Behalf 
Of Albert Chu
Sent: Monday, August 29, 2011 12:45 PM
To: Александр Воробьев
Cc: [email protected]
Subject: Re: [Freeipmi-devel] Issue with Supermicro X8SIL

Just gotta add those motherboards.  I'll have a new beta up sometime
later today.

Al

On Mon, 2011-08-29 at 00:14 -0700, Александр Воробьев wrote:
> Hi Al. 
> 
> 
> Great thanks, this update works fine. 
> Now I have the same issue with the following hardware:
> 
> 
> Manufacturer: Supermicro
> Product Name: X9SCL/X9SCM
> 
> 
> Here what I got:
> 
> 
> # ipmimonitoring --interpret-oem-data
> ID   | Name          | Type              | State    | Reading    |
> Units | Event
> 
>                                                         
> 4    | System Temp   | Temperature       | Nominal  | 31.00      | C
> | 'OK'
> 
>                                                    
> 71   | CPU Temp      | OEM Reserved      | N/A      | N/A        | N/A
> | 'OEM Event = 0000h'
> 
>                                                   
> 138  | FAN 1         | Fan               | Nominal  | 14580.00   | RPM
> | 'OK'
> 
>                                                    
> 205  | FAN 2         | Fan               | Nominal  | 13635.00   | RPM
> | 'OK'
> 
>                                                    
> 272  | FAN 3         | Fan               | Nominal  | 13635.00   | RPM
> | 'OK'
> 
>                                                    
> 406  | FAN A         | Fan               | Nominal  | 13500.00   | RPM
> | 'OK'
> 
>                                                    
> 473  | Vcore         | Voltage           | Nominal  | 1.00       | V
> | 'OK'
> 
>                                                    
> 540  | 3.3VCC        | Voltage           | Nominal  | 3.39       | V
> | 'OK'
> 
>                                                    
> 607  | 12V           | Voltage           | Nominal  | 12.14      | V
> | 'OK'
> 
>                                                    
> 674  | VDIMM         | Voltage           | Nominal  | 1.51       | V
> | 'OK'
> 
>                                                    
> 741  | 5VCC          | Voltage           | Nominal  | 5.09       | V
> | 'OK'
> 
>                                                    
> 808  | -12V          | Voltage           | Nominal  | -12.45     | V
> | 'OK'
> 875  | VBAT          | Voltage           | Nominal  | 3.09       | V
> | 'OK'
> 942  | VSB           | Voltage           | Nominal  | 3.36       | V
> | 'OK'
> 1009 | AVCC          | Voltage           | Nominal  | 3.39       | V
> | 'OK'
> 1076 | Chassis Intru | Physical Security | Nominal  | N/A        | N/A
> | 'OK'
> 1143 | PS Status     | Power Supply      | N/A      | N/A        | N/A
> | 'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event
> = 0200h' 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h'
> 'Unrecognized Event = 1000h' 'Unrecognized Event = 2000h'
> 'Unrecognized Event = 4000h'
> # bmc-info
> Device ID             : 32
> Device Revision       : 1
> Device SDRs           : unsupported
> Firmware Revision     : 1.08
> Device Available      : yes (normal operation)
> IPMI Version          : 2.0
> Sensor Device         : supported
> SDR Repository Device : supported
> SEL Device            : supported
> FRU Inventory Device  : supported
> IPMB Event Receiver   : supported
> IPMB Event Generator  : supported
> Bridge                : unsupported
> Chassis Device        : supported
> Manufacturer ID       : Super Micro Computer Inc. (47488)
> Product ID            : 1572
> 
> 
> GUID : 00000000-0000-0000-0000-000000000000
> 
> 
> Channel Information
> 
> 
> Channel Number       : 0
> Medium Type          : IPMB (I2C)
> Protocol Type        : IPMB-1.0
> Active Session Count : 0
> Session Support      : session-less
> Vendor ID            : Intelligent Platform Management Interface forum
> (7154)
> 
> 
> Channel Number       : 1
> Medium Type          : 802.3 LAN
> Protocol Type        : IPMB-1.0
> Active Session Count : 0
> Session Support      : multi-session
> Vendor ID            : Intelligent Platform Management Interface forum
> (7154)
> 
> 
> Channel Number       : 3
> Medium Type          : Asynch. Serial/Modem (RS-232)
> Protocol Type        : IPMB-1.0
> Active Session Count : 0
> Session Support      : single-session
> Vendor ID            : Intelligent Platform Management Interface forum
> (7154)
> 
> 
> Channel Number       : 5
> Medium Type          : IPMB (I2C)
> Protocol Type        : IPMB-1.0
> Active Session Count : 0
> Session Support      : session-less
> Vendor ID            : Intelligent Platform Management Interface forum
> (7154)
> # 
> 
> 
> Your help will be greatly appreciated. 
> 
> 
> Regards,
> Alexander V.
> 
> 
-- 
Albert Chu
[email protected]
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory



_______________________________________________
Freeipmi-devel mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/freeipmi-devel
_______________________________________________
Freeipmi-devel mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/freeipmi-devel

Reply via email to