Hi Al, when querying a Supermicro X8SIL mainboard (IPMI Firmware Rev. 2.05) I have found an issue that the 'CPU1 Temp' and 'CPU2 Temp' OEM sensors cannot currently be interpreted:
# ipmimonitoring ID | Name | Type | State | Reading | Units | Event 4 | System Temp | Temperature | Critical | -121.00 | C | 'At or Below (<=) Lower Non-Recoverable Threshold' 71 | CPU Temp | OEM Reserved | N/A | N/A | N/A | 'OEM Event = 0000h' 205 | FAN 2 | Fan | Nominal | 5025.00 | RPM | 'OK' 473 | CPU Vcore | Voltage | Nominal | 0.90 | V | 'OK' 540 | +3.3VCC | Voltage | Nominal | 3.38 | V | 'OK' 607 | +12 V | Voltage | Nominal | 11.82 | V | 'OK' 674 | CPU DIMM | Voltage | Nominal | 1.53 | V | 'OK' 741 | +5 V | Voltage | Nominal | 5.06 | V | 'OK' 808 | -12 V | Voltage | Nominal | -12.09 | V | 'OK' 875 | VBAT | Voltage | Nominal | 3.22 | V | 'OK' 942 | +3.3VSB | Voltage | Nominal | 3.36 | V | 'OK' 1009 | AVCC | Voltage | Nominal | 3.38 | V | 'OK' 1076 | Chassis Intru | Physical Security | Nominal | N/A | N/A | 'OK' 1143 | PS Status | Power Supply | N/A | N/A | N/A | 'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event = 0200h' 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h' 'Unrecognized Event = 1000h' 'Unrecognized Event = 2000h' 'Unrecognized Event = 4000h' # # bmc-info Device ID : 32 Device Revision : 1 Device SDRs : unsupported Firmware Revision : 2.50 Device Available : yes (normal operation) IPMI Version : 2.0 Sensor Device : supported SDR Repository Device : supported SEL Device : supported FRU Inventory Device : supported IPMB Event Receiver : supported IPMB Event Generator : supported Bridge : unsupported Chassis Device : supported Manufacturer ID : Super Micro Computer Inc. (47488) Product ID : 1541 GUID : 00000000-0000-0000-0000-000000000000 Channel Information Channel Number : 0 Medium Type : IPMB (I2C) Protocol Type : IPMB-1.0 Active Session Count : 0 Session Support : session-less Vendor ID : Intelligent Platform Management Interface forum (7154) Channel Number : 1 Medium Type : 802.3 LAN Protocol Type : IPMB-1.0 Active Session Count : 0 Session Support : multi-session Vendor ID : Intelligent Platform Management Interface forum (7154) Channel Number : 3 Medium Type : Asynch. Serial/Modem (RS-232) Protocol Type : IPMB-1.0 Active Session Count : 0 Session Support : single-session Vendor ID : Intelligent Platform Management Interface forum (7154) Channel Number : 5 Medium Type : IPMB (I2C) Protocol Type : IPMB-1.0 Active Session Count : 0 Session Support : session-less Vendor ID : Intelligent Platform Management Interface forum (7154) # Can you please add this ProductID to the list, let me know if you need additional info. Best regards, Alexander V.
_______________________________________________ Freeipmi-devel mailing list [email protected] https://lists.gnu.org/mailman/listinfo/freeipmi-devel
