Hey Andy, Last I checked, IANA was no where near 47488 so I don't see how it could be assigned to WinBond. FreeIPMI's ID->string array is generated off of this:
http://www.iana.org/assignments/enterprise-numbers As far as I can tell, all of Supermicro's motherboards use this strange manufacturer ID, so I began supporting it as a special case. I'll ping Supermicro again about changing it. Al On Mon, 2011-08-29 at 10:51 -0700, Andy Cress wrote: > Hmmm. AFAIK, the 47488 IANA number was assigned to WinBond, so I > believe the firmware vendor should be WinBond, but the system vendor > in this case is SuperMicro, using the WinBond BMC. SuperMicro has > used 4 different BMC vendors over time, by my count. > > However, the iana.org site has not posted this number, so that would > be the official arbiter of the vendor name, when it is > registered/posted. > > Andy > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On > Behalf Of Albert Chu > Sent: Monday, August 29, 2011 12:45 PM > To: Александр Воробьев > Cc: [email protected] > Subject: Re: [Freeipmi-devel] Issue with Supermicro X8SIL > > Just gotta add those motherboards. I'll have a new beta up sometime > later today. > > Al > > On Mon, 2011-08-29 at 00:14 -0700, Александр Воробьев wrote: > > Hi Al. > > > > > > Great thanks, this update works fine. > > Now I have the same issue with the following hardware: > > > > > > Manufacturer: Supermicro > > Product Name: X9SCL/X9SCM > > > > > > Here what I got: > > > > > > # ipmimonitoring --interpret-oem-data > > ID | Name | Type | State | Reading | > > Units | Event > > > > > > 4 | System Temp | Temperature | Nominal | 31.00 | C > > | 'OK' > > > > > > 71 | CPU Temp | OEM Reserved | N/A | N/A | N/A > > | 'OEM Event = 0000h' > > > > > > 138 | FAN 1 | Fan | Nominal | 14580.00 | RPM > > | 'OK' > > > > > > 205 | FAN 2 | Fan | Nominal | 13635.00 | RPM > > | 'OK' > > > > > > 272 | FAN 3 | Fan | Nominal | 13635.00 | RPM > > | 'OK' > > > > > > 406 | FAN A | Fan | Nominal | 13500.00 | RPM > > | 'OK' > > > > > > 473 | Vcore | Voltage | Nominal | 1.00 | V > > | 'OK' > > > > > > 540 | 3.3VCC | Voltage | Nominal | 3.39 | V > > | 'OK' > > > > > > 607 | 12V | Voltage | Nominal | 12.14 | V > > | 'OK' > > > > > > 674 | VDIMM | Voltage | Nominal | 1.51 | V > > | 'OK' > > > > > > 741 | 5VCC | Voltage | Nominal | 5.09 | V > > | 'OK' > > > > > > 808 | -12V | Voltage | Nominal | -12.45 | V > > | 'OK' > > 875 | VBAT | Voltage | Nominal | 3.09 | V > > | 'OK' > > 942 | VSB | Voltage | Nominal | 3.36 | V > > | 'OK' > > 1009 | AVCC | Voltage | Nominal | 3.39 | V > > | 'OK' > > 1076 | Chassis Intru | Physical Security | Nominal | N/A | N/A > > | 'OK' > > 1143 | PS Status | Power Supply | N/A | N/A | N/A > > | 'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event > > = 0200h' 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h' > > 'Unrecognized Event = 1000h' 'Unrecognized Event = 2000h' > > 'Unrecognized Event = 4000h' > > # bmc-info > > Device ID : 32 > > Device Revision : 1 > > Device SDRs : unsupported > > Firmware Revision : 1.08 > > Device Available : yes (normal operation) > > IPMI Version : 2.0 > > Sensor Device : supported > > SDR Repository Device : supported > > SEL Device : supported > > FRU Inventory Device : supported > > IPMB Event Receiver : supported > > IPMB Event Generator : supported > > Bridge : unsupported > > Chassis Device : supported > > Manufacturer ID : Super Micro Computer Inc. (47488) > > Product ID : 1572 > > > > > > GUID : 00000000-0000-0000-0000-000000000000 > > > > > > Channel Information > > > > > > Channel Number : 0 > > Medium Type : IPMB (I2C) > > Protocol Type : IPMB-1.0 > > Active Session Count : 0 > > Session Support : session-less > > Vendor ID : Intelligent Platform Management Interface forum > > (7154) > > > > > > Channel Number : 1 > > Medium Type : 802.3 LAN > > Protocol Type : IPMB-1.0 > > Active Session Count : 0 > > Session Support : multi-session > > Vendor ID : Intelligent Platform Management Interface forum > > (7154) > > > > > > Channel Number : 3 > > Medium Type : Asynch. Serial/Modem (RS-232) > > Protocol Type : IPMB-1.0 > > Active Session Count : 0 > > Session Support : single-session > > Vendor ID : Intelligent Platform Management Interface forum > > (7154) > > > > > > Channel Number : 5 > > Medium Type : IPMB (I2C) > > Protocol Type : IPMB-1.0 > > Active Session Count : 0 > > Session Support : session-less > > Vendor ID : Intelligent Platform Management Interface forum > > (7154) > > # > > > > > > Your help will be greatly appreciated. > > > > > > Regards, > > Alexander V. > > > > -- Albert Chu [email protected] Computer Scientist High Performance Systems Division Lawrence Livermore National Laboratory _______________________________________________ Freeipmi-devel mailing list [email protected] https://lists.gnu.org/mailman/listinfo/freeipmi-devel
