"Bogdan" <[EMAIL PROTECTED]> wrote: > Maybe someone knows what is happening here, > 1. NAS (Ericson Express36100) keeps sending accounting packets to radius with > message in radius.log "Info: NAS rt1 restarted (Accounting-On packet seen)" > even that previous user was authenticated "Login OK" happen just seconds ago.
So the NAS is screwed up. It shouldn't be sending Accounting-On packets so often. > 2. Also and probably releted to the point 1 I have a different reports from radwho > and NAS (web interface). NAS reports user connected and radius not. The radius server only reports information sent to it in accounting records. If the NAS is saying it's rebooted, then RADIUS assumes that the users are logged off, and wipes the accounting records. > 3. Somethimes people have to enter user name and password several times before > radius lets them in. So run the server in debugging mode to see what's going on. > Would this problem have something to do with radtemp? can i clear/delete it > and start again to make sure that we have no problems there? No. > NAS set up redius authentication and accounting is 15 seconds and one retry. > we have 100mb network (so it is not slow), i checked DNS (it works OK) Your NAS sounds like it's screwed up. There isn't much you can do to the radius server to fix the NAS. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
