Ugh.. Forget this thread -- I'm dumb! I know it's supported but what I should have mentioned was that I was trying to insert them via the web-interface which isn't supported here..
Sorry! :p > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]] On Behalf Of > Jason Lixfeld > Sent: Monday, August 19, 2002 1:24 PM > To: [EMAIL PROTECTED] > Subject: IPSec tunnels > > > I'm trying to configure authentication and authorization for the Cisco > VPN client out of FreeRadius. Cisco's docs > (http://www.cisco.com/warp/public/707/ipsec_radius_config.html > ) call for > the following: > > ipsec:key-exchange=ike > ipsec:key-exchange=preshared-key > ipsec:addr-pool=ippool > ipsec:inacl=list > > Attribute 6: Service-Type=Outbound > Attribute 64: Tunnel-Type=IP ESP > Attribute 69: Tunnel-Password=password > > The ipsec: av pairs I found and configured them as groupreply items. > I've found Service-Type but I can't find Tunnel-Type or > Tunnel-Password. > Anything special I need to do to get these in there? > > > Regards, > -- > > Jason Lixfeld > Senior IP Network Engineer > Fastvibe Corporation > > -- > > tel://416.341.0099:223 > fax://416.341.0088 > mailto:[EMAIL PROTECTED] > > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
