Actually no I was talking about the icradius web interface. I'm going to try dialup_admin though.
> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]] On Behalf Of > Kostas Kalevras > Sent: Monday, August 19, 2002 2:34 PM > To: [EMAIL PROTECTED] > Subject: RE: IPSec tunnels > > > On Mon, 19 Aug 2002, Jason Lixfeld wrote: > > > Ugh.. Forget this thread -- I'm dumb! I know it's > supported but what I > > should have mentioned was that I was trying to insert them via the > > web-interface which isn't supported here.. > > > > Sorry! :p > > Assuming you are using SQL and by web interface you mean dialup_admin. > Go to the conf directory and add to sql.attrmap: > > replyItem Tunnel-Type Tunnel-Type > replyItem Tunnel-Password Tunnel-Password > > Also add the following to user_edit.attrs: > > Tunnel-Type Tunnel Type > Tunnel-Password Tunnel Password > > Everything should work just fine after that. > > -- > Kostas Kalevras Network Operations Center > [EMAIL PROTECTED] National Technical University of Athens, Greece > Work Phone: +30 10 7721861 > 'Go back to the shadow' Gandalf > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED]] On Behalf Of > > > Jason Lixfeld > > > Sent: Monday, August 19, 2002 1:24 PM > > > To: [EMAIL PROTECTED] > > > Subject: IPSec tunnels > > > > > > > > > I'm trying to configure authentication and authorization > for the Cisco > > > VPN client out of FreeRadius. Cisco's docs > > > (http://www.cisco.com/warp/public/707/ipsec_radius_config.html > > > ) call for > > > the following: > > > > > > ipsec:key-exchange=ike > > > ipsec:key-exchange=preshared-key > > > ipsec:addr-pool=ippool > > > ipsec:inacl=list > > > > > > Attribute 6: Service-Type=Outbound > > > Attribute 64: Tunnel-Type=IP ESP > > > Attribute 69: Tunnel-Password=password > > > > > > The ipsec: av pairs I found and configured them as > groupreply items. > > > I've found Service-Type but I can't find Tunnel-Type or > > > Tunnel-Password. > > > Anything special I need to do to get these in there? > > > > > > > > > Regards, > > > -- > > > > > > Jason Lixfeld > > > Senior IP Network Engineer > > > Fastvibe Corporation > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
