On Mon, 19 Aug 2002, Jason Lixfeld wrote: > Ugh.. Forget this thread -- I'm dumb! I know it's supported but what I > should have mentioned was that I was trying to insert them via the > web-interface which isn't supported here.. > > Sorry! :p
Assuming you are using SQL and by web interface you mean dialup_admin. Go to the conf directory and add to sql.attrmap: replyItem Tunnel-Type Tunnel-Type replyItem Tunnel-Password Tunnel-Password Also add the following to user_edit.attrs: Tunnel-Type Tunnel Type Tunnel-Password Tunnel Password Everything should work just fine after that. -- Kostas Kalevras Network Operations Center [EMAIL PROTECTED] National Technical University of Athens, Greece Work Phone: +30 10 7721861 'Go back to the shadow' Gandalf > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]] On Behalf Of > > Jason Lixfeld > > Sent: Monday, August 19, 2002 1:24 PM > > To: [EMAIL PROTECTED] > > Subject: IPSec tunnels > > > > > > I'm trying to configure authentication and authorization for the Cisco > > VPN client out of FreeRadius. Cisco's docs > > (http://www.cisco.com/warp/public/707/ipsec_radius_config.html > > ) call for > > the following: > > > > ipsec:key-exchange=ike > > ipsec:key-exchange=preshared-key > > ipsec:addr-pool=ippool > > ipsec:inacl=list > > > > Attribute 6: Service-Type=Outbound > > Attribute 64: Tunnel-Type=IP ESP > > Attribute 69: Tunnel-Password=password > > > > The ipsec: av pairs I found and configured them as groupreply items. > > I've found Service-Type but I can't find Tunnel-Type or > > Tunnel-Password. > > Anything special I need to do to get these in there? > > > > > > Regards, > > -- > > > > Jason Lixfeld > > Senior IP Network Engineer > > Fastvibe Corporation - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
