you MUST use the virtual-interface feature of cisco IOS. you can setup timeouts only with virtual interface
At 11.12 12/10/02, you wrote: >hi, > >I am using freeradius 0.5, and sqlcounter module. >I use the freeradius with a Patton and I got no problem auth, accounting, >and disconnection. > >But when I try iy with the CISCO as5300(IOS 12.2), all the accounting and >authentication works fine, but I got just one problem : >the cisco can't disconnect the dialer if they reach there session-timeout? > >the cisco configuratiogn is: > >aaa new-model >aaa authentication login default group radius >aaa authentication ppp default if-needed group radius >aaa authorization exec default if-authenticated group radius >aaa authorization network default if-authenticated group radius >aaa accounting delay-start >aaa accounting exec default start-stop group radius >aaa accounting network default start-stop group radius >aaa processes 6 > > >when I use the debug mode in cisco I got: > > User: ciscotesting, line tty 7, service Async > Active time 00:03:12, Idle time 00:00:03 > Timeouts: Absolute Idle Idle > Session Exec > Limits: - - 00:10:00 > Disconnect in: - - - > TTY: Line 7, running PPP on As7 > Location: PPP: x.x.x.x > DS0: (slot/unit/channel)=0/0/14 > Line: Baud rate (TX/RX) is 115200/115200, no parity, 1 stopbits, 8 databits > Status: Ready, Active, No Exit Banner, Async Interface Active > HW PPP Support Active, Modem Detected > Capabilities: Hardware Flowcontrol In, Hardware Flowcontrol Out > Modem RI is CD, Line usable as async interface > Modem Autoconfigure, Integrated Modem > Modem State: Ready, Modem Configured > > User: ciscotest, line As7, service PPP > Active time 00:03:02, Idle time 00:00:03 > Timeouts: Absolute Idle > Limits: - - > Disconnect in: - - > PPP: LCP Open, IPCP > IP: Local x.x.x.x, remote x.x.x.x > Counts: 226 packets input, 13485 bytes, 0 no buffer > 0 input errors, 0 CRC, 0 frame, 0 overrun > 207 packets output, 14700 bytes, 0 underruns > 0 output errors, 0 collisions, 0 interface resets > > in the timeouts (limits and disconnect) I got no thing. > >is there any thing to change in the freeradius dictionary? > >thanks > > > >- >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html --------------------------------------- Where's the ANY key? --------------------------------------- Ing. Andrea Gabellini Email: [EMAIL PROTECTED] Tel: 0549 886111 (Italy) Tel. +378 0549 886111 (International) Intelcom San Marino S.p.A. Strada degli Angariari, 3 47891 Rovereta Repubblic of San Marino http://www.omniway.sm http://www.intelcom.sm - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
