hi, Thank you for the help Andrea, can you give me more precision, what you mean by virtual-interface?
thanks. > hi, > > I 'am using interface Group-Async , should I replace it by interface > Dialer ? > > Is this what you mean? > >> you MUST use the virtual-interface feature of cisco IOS. you can setup >> timeouts only with virtual interface >> >> At 11.12 12/10/02, you wrote: >>>hi, >>> >>>I am using freeradius 0.5, and sqlcounter module. >>>I use the freeradius with a Patton and I got no problem auth, >>> accounting, and disconnection. >>> >>>But when I try iy with the CISCO as5300(IOS 12.2), all the accounting >>> and authentication works fine, but I got just one problem : >>>the cisco can't disconnect the dialer if they reach there >>> session-timeout? >>> >>>the cisco configuratiogn is: >>> >>>aaa new-model >>>aaa authentication login default group radius >>>aaa authentication ppp default if-needed group radius >>>aaa authorization exec default if-authenticated group radius >>>aaa authorization network default if-authenticated group radius >>>aaa accounting delay-start >>>aaa accounting exec default start-stop group radius >>>aaa accounting network default start-stop group radius >>>aaa processes 6 >>> >>> >>>when I use the debug mode in cisco I got: >>> >>> User: ciscotesting, line tty 7, service Async >>> Active time 00:03:12, Idle time 00:00:03 >>> Timeouts: Absolute Idle Idle >>> Session Exec >>> Limits: - - 00:10:00 >>> Disconnect in: - - - >>> TTY: Line 7, running PPP on As7 >>> Location: PPP: x.x.x.x >>> DS0: (slot/unit/channel)=0/0/14 >>> Line: Baud rate (TX/RX) is 115200/115200, no parity, 1 stopbits, 8 >>> databits Status: Ready, Active, No Exit Banner, Async Interface >>> Active >>> HW PPP Support Active, Modem Detected >>> Capabilities: Hardware Flowcontrol In, Hardware Flowcontrol Out >>> Modem RI is CD, Line usable as async interface >>> Modem Autoconfigure, Integrated Modem >>> Modem State: Ready, Modem Configured >>> >>> User: ciscotest, line As7, service PPP >>> Active time 00:03:02, Idle time 00:00:03 >>> Timeouts: Absolute Idle >>> Limits: - - >>> Disconnect in: - - >>> PPP: LCP Open, IPCP >>> IP: Local x.x.x.x, remote x.x.x.x >>> Counts: 226 packets input, 13485 bytes, 0 no buffer >>> 0 input errors, 0 CRC, 0 frame, 0 overrun >>> 207 packets output, 14700 bytes, 0 underruns >>> 0 output errors, 0 collisions, 0 interface resets >>> >>> in the timeouts (limits and disconnect) I got no thing. >>> >>>is there any thing to change in the freeradius dictionary? >>> >>>thanks >>> >>> >>> >>>- >>>List info/subscribe/unsubscribe? See >>> http://www.freeradius.org/list/users.html >> >> >> --------------------------------------- >> Where's the ANY key? >> --------------------------------------- >> Ing. Andrea Gabellini >> Email: [EMAIL PROTECTED] >> Tel: 0549 886111 (Italy) >> Tel. +378 0549 886111 (International) >> >> Intelcom San Marino S.p.A. >> Strada degli Angariari, 3 >> 47891 Rovereta >> Repubblic of San Marino >> >> http://www.omniway.sm http://www.intelcom.sm >> >> >> - >> List info/subscribe/unsubscribe? See >> http://www.freeradius.org/list/users.html > > > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
