auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user
auth: Failed to validate the user.
I think there are two issues at work here. One, I have been unable to get rlm_dbm_parser to generate a .db file and have had to use another similar program to generate one. rlm_dbm_parser runs OK, show no errors, but just doesn't generate a .db file.
Second, how to configure FreeRadius to use the users file first and THEN go to the FreeBSD system calls for authentication out of the system password file.
Again I stress, if any one out there REALLY know FreeRadius, I will gladly pay several hours consulting fees to get this going. But I need help ASAP.
Thanks,
Gary
At 09:09 AM 12/6/2002 -0500, you wrote:
Good morning Gary,
rlm_dbm: User <DEFAULT> not foud in database
looks to be the culprit. I don't know offhand if the <> characters are
put into the output and is only there as a delimiter or if that is
infact what is being passed to the dbm module. If it's the former, I'm
at a loss, but if it's the latter then there may be something adding
those characters to the entry which the module can't match because of
course it doesn't actually exist.
One thing I might be able to suggest is to remove the dbm module from
the equation and see if you can auth against a plain text users file.
If that works, then it's something with the dbm module, I'd suspect.
On Fri, 2002-12-06 at 08:26, [EMAIL PROTECTED] wrote:
> Here's the facts:
>
> FreeRadius ver 0.8
>
> OS FreeBSD
>
> User name and password has been verified to be accurate.
>
> Trying to do test authentication from a Livingston PM4 (hey, it's what I
> had laying around)
>
> Only one entry in the users file:
>
> DEFAULT Auth-Type := System, Simultaneous-Use := 1
> Framed-IP-Address = 255.255.255.254,
> Framed-MTU = 1500,
> Service-Type = Framed-User,
> Framed-Protocol = PPP,
> Framed-Compression = Van-Jacobson-TCP-IP,
> Framed-Routing = None
>
> Objective: If user is not defined in user file, have FreeRadius fall
> through and use the system's authentication process.
>
> Here's the output from the debugging:
>
> Ready to process requests.
> rad_recv: Access-Request packet from host 208.187.24.17:1332, id=9, length=59
> User-Name = "elitest"
> User-Password = "test"
> NAS-IP-Address = 208.187.24.17
> NAS-Port = 99
> modcall: entering group authorize
> modcall[authorize]: module "preprocess" returns ok
> rlm_realm: No '@' in User-Name = "elitest", looking up realm NULL
> rlm_realm: No such realm NULL
> modcall[authorize]: module "suffix" returns noop
> rlm_dbm: try open database file: /usr/local/etc/raddb/users
> rlm_dbm: Call parse_user:
> sm_parse_user.c: check for loops
> Add elitest to user list
> rlm_dbm: User <elitest> not foud in database
> Remove elitest from user list
> sm_parse_user.c: check for loops
> Add DEFAULT to user list
> rlm_dbm: User <DEFAULT> not foud in database
> Remove DEFAULT from user list
> modcall[authorize]: module "dbm" returns notfound
> modcall: group authorize returns ok
> auth: No authenticate method (Auth-Type) configuration found for the
> request: Re
> jecting the user
> auth: Failed to validate the user.
> Delaying request 0 for 1 seconds
> Finished request 0
>
> Can someone PLEASE help me? I am probably doing something stupid, but
> desperately need help. I WILL EVEN PAY FOR SOMEONE WELL VERSED IN
> FREERADIUS TO CONSULT ON THE PHONE.
>
> Thanks,
> Gary
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
--
Regards,
Jason A. Lixfeld Fastvibe Corporation
Senior IP Network Engineer 220-156 Front St. W
[EMAIL PROTECTED] Toronto, ON M5V-2L6
-------------------------------------------------------------
tel://416.341.0099:223 fax://416.341.0088
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
