> Second, how to configure FreeRadius to use the users file first and THEN go > to the FreeBSD system calls for authentication out of the system password file.
Try the fall-through reply item in your default profile. That should push it out to the next module if nothing else in the users file matches. > Again I stress, if any one out there REALLY know FreeRadius, I will gladly > pay several hours consulting fees to get this going. But I need help ASAP. I don't have the experience to offer any sensible support and even if I did, I just don't have the time. > Thanks, > Gary > > At 09:09 AM 12/6/2002 -0500, you wrote: > >Good morning Gary, > > > >rlm_dbm: User <DEFAULT> not foud in database > > > >looks to be the culprit. I don't know offhand if the <> characters are > >put into the output and is only there as a delimiter or if that is > >infact what is being passed to the dbm module. If it's the former, I'm > >at a loss, but if it's the latter then there may be something adding > >those characters to the entry which the module can't match because of > >course it doesn't actually exist. > > > >One thing I might be able to suggest is to remove the dbm module from > >the equation and see if you can auth against a plain text users file. > > > >If that works, then it's something with the dbm module, I'd suspect. > > > >On Fri, 2002-12-06 at 08:26, [EMAIL PROTECTED] wrote: > > > Here's the facts: > > > > > > FreeRadius ver 0.8 > > > > > > OS FreeBSD > > > > > > User name and password has been verified to be accurate. > > > > > > Trying to do test authentication from a Livingston PM4 (hey, it's what I > > > had laying around) > > > > > > Only one entry in the users file: > > > > > > DEFAULT Auth-Type := System, Simultaneous-Use := 1 > > > Framed-IP-Address = 255.255.255.254, > > > Framed-MTU = 1500, > > > Service-Type = Framed-User, > > > Framed-Protocol = PPP, > > > Framed-Compression = Van-Jacobson-TCP-IP, > > > Framed-Routing = None > > > > > > Objective: If user is not defined in user file, have FreeRadius fall > > > through and use the system's authentication process. > > > > > > Here's the output from the debugging: > > > > > > Ready to process requests. > > > rad_recv: Access-Request packet from host 208.187.24.17:1332, id=9, > > length=59 > > > User-Name = "elitest" > > > User-Password = "test" > > > NAS-IP-Address = 208.187.24.17 > > > NAS-Port = 99 > > > modcall: entering group authorize > > > modcall[authorize]: module "preprocess" returns ok > > > rlm_realm: No '@' in User-Name = "elitest", looking up realm NULL > > > rlm_realm: No such realm NULL > > > modcall[authorize]: module "suffix" returns noop > > > rlm_dbm: try open database file: /usr/local/etc/raddb/users > > > rlm_dbm: Call parse_user: > > > sm_parse_user.c: check for loops > > > Add elitest to user list > > > rlm_dbm: User <elitest> not foud in database > > > Remove elitest from user list > > > sm_parse_user.c: check for loops > > > Add DEFAULT to user list > > > rlm_dbm: User <DEFAULT> not foud in database > > > Remove DEFAULT from user list > > > modcall[authorize]: module "dbm" returns notfound > > > modcall: group authorize returns ok > > > auth: No authenticate method (Auth-Type) configuration found for the > > > request: Re > > > jecting the user > > > auth: Failed to validate the user. > > > Delaying request 0 for 1 seconds > > > Finished request 0 > > > > > > Can someone PLEASE help me? I am probably doing something stupid, but > > > desperately need help. I WILL EVEN PAY FOR SOMEONE WELL VERSED IN > > > FREERADIUS TO CONSULT ON THE PHONE. > > > > > > Thanks, > > > Gary > > > > > > > > > - > > > List info/subscribe/unsubscribe? See > > http://www.freeradius.org/list/users.html > >-- > >Regards, > > > >Jason A. Lixfeld Fastvibe Corporation > >Senior IP Network Engineer 220-156 Front St. W > >[EMAIL PROTECTED] Toronto, ON M5V-2L6 > >------------------------------------------------------------- > >tel://416.341.0099:223 fax://416.341.0088 > > > > > > > >- > >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html -- Regards, Jason A. Lixfeld Fastvibe Corporation Senior IP Network Engineer 220-156 Front St. W [EMAIL PROTECTED] Toronto, ON M5V-2L6 ------------------------------------------------------------- tel://416.341.0099:223 fax://416.341.0088 - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
