Does it use telnet or SNMP to log in the Portmaster and determine if a user is already active? If it uses SNMP I likely need to configure it yet.
Matt > Am Fre, 2003-10-17 um 17.34 schrieb Matt: > > I have done that. I am likely not giving near enough info to get help. > > > > ---snip--- > > > DEFAULT Auth-Type := Local > > Simultaneous-Use = 1, > > Service-Type = Framed-User, > > Framed-Protocol = PPP, > > Framed-Routing = Broadcast-Listen, > > Idle-Timeout = 900, > > Session-Timeout = 28800, > > Filter-Id = "firewall", > > Fall-Through = 1 > > > > Simultaneous-Use is a Check-Item. So > > DEFAULT Auth-Type := Local, Simultaneous-Use := 1 > > should work... > > > Am I on the right track here? Do I need to add SNMP config settings to the > > portmasters or something? > > > > Thanks > > > > Matt > > > > > Am Fre, 2003-10-17 um 06.44 schrieb Matt: > > > > I have a couple Portmaster 3's. Does anyone out there know the trick to > > > > getting freeRadius to prevent duplicate logins on these units? > > > > > > See doc/Simultaneous-Use - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
