Am Fre, 2003-10-17 um 17.58 schrieb Matt: > Does it use telnet or SNMP to log in the Portmaster and determine if a user > is already active? If it uses SNMP I likely need to configure it yet. > > Matt
AFAIK it will work using SNMP. checkrad is written in perl, so any adjustment should be easy... (OID 307.3.2.1.1.1.4) OoLee > > > Am Fre, 2003-10-17 um 17.34 schrieb Matt: > > > I have done that. I am likely not giving near enough info to get help. > > > > > > > ---snip--- > > > > > DEFAULT Auth-Type := Local > > > Simultaneous-Use = 1, > > > Service-Type = Framed-User, > > > Framed-Protocol = PPP, > > > Framed-Routing = Broadcast-Listen, > > > Idle-Timeout = 900, > > > Session-Timeout = 28800, > > > Filter-Id = "firewall", > > > Fall-Through = 1 > > > > > > > Simultaneous-Use is a Check-Item. So > > > > DEFAULT Auth-Type := Local, Simultaneous-Use := 1 > > > > should work... > > > > > Am I on the right track here? Do I need to add SNMP config settings to > the > > > portmasters or something? > > > > > > Thanks > > > > > > Matt > > > > > > > Am Fre, 2003-10-17 um 06.44 schrieb Matt: > > > > > I have a couple Portmaster 3's. Does anyone out there know the > trick to > > > > > getting freeRadius to prevent duplicate logins on these units? > > > > > > > > See doc/Simultaneous-Use > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
