Rob,
Thanks. I doubled checked. The comma is there. Sorry
'bout that.
I really have no clue what is going on here. The
message indicate no password is present in the
request, yet in the debug log is it shown. Here
is a snippit of the log:
Listening on IP address *, ports 1812/udp and
1813/udp, with proxy on 1814/udp.
Ready to process requests.
rad_recv: Access-Request packet from host
XX.XXX.XXX.XXX:33631, id=139, length=65
User-Name = "00022d-8152d8"
User-Password = "blbb"
NAS-IP-Address = 192.168.0.200
NAS-Port = 0
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok
for request 0
modcall[authorize]: module "chap" returns noop for
request 0
modcall[authorize]: module "eap" returns noop for
request 0
rlm_realm: No '@' in User-Name = "00022d-8152d8",
looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for
request 0
users: Matched DEFAULT at 153
modcall[authorize]: module "files" returns ok for
request 0
modcall[authorize]: module "mschap" returns noop for
request 0
modcall: group authorize returns ok for request 0
rad_check_password: Found Auth-Type Local
auth: type Local
auth: No password configured for the user
auth: Failed to validate the user.
Any ideas??????
Bill
--- Rob Genovesi <[EMAIL PROTECTED]> wrote:
> Looks like a syntax error in the users file. Your
> missing a comma after
> the auth-type in your specific user entry.
> Correct entry should look like:
> 000102-030405 Auth-Type := Local, User-Password ==
> "xxxx"
>
> Also use ":=" to declar your Auth-Type in the
> DEFAULT entry. (Theres an
> example in the stock users file that uses just "=",
> but I think ":=" is
> more correct)
>
> Refer to http://www.freeradius.org/doc/users.5.html
>
>
>
> -Rob
>
>
> At 08:33 AM 11/24/2003 -0800, you wrote:
> >Hi,
> >
> >I'm using freeradius 0.9.3 on redhat 9.0. I'm
> trying
> >to get simple authentication working using the
> users
> >file. I have edited the client.conf and users file
> but
> >nothing else.
> >
> >When running under debug, I can see the
> authentication
> >request come in and I have verified that the shared
> >secret is ok.
> >
> >However, depending on how I edit the users file, I
> >either get:
> >
> >auth: No password configured for user
> >
> >or
> >
> >auth: No authentication method (Auth-Type)
> >configuration found for the request: rejecting user
> >
> >
> >In the first case I have in the users file:
> >
> >DEFAULT Auth-Type = Local
> > Fall-Through = Yes
> >
> >000102-030405 Auth-Type := Local User-Password ==
> >"xxxx"
> >
> >In the second case, I have the same without the
> >DEFAULT entry.
> >
> >The user name is a mac address from a wireless
> device.
> >Should it be in double quotes? What do I need to do
> to
> >get this simple case working?
> >
> >Bill
> >
> >__________________________________
> >Do you Yahoo!?
> >Free Pop-Up Blocker - Get it now
> >http://companion.yahoo.com/
> >
> >-
> >List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
>
> -
> List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
