Yes it's in the users file. My example was a "mock up" of the user file. I should have cut & pasted the real data!
Anyway the problem turned out to be a bad password? (see my other post). Thanks for your responses. Bill --- Rob Genovesi <[EMAIL PROTECTED]> wrote: > The username "00022d-8152d8" is in your users file? > > You can see it is matching the DEFAULT entry at line > 153 (users: Matched > DEFAULT at 153) , > but it does not seem to find this specific username > in the users file. > > Other recommendation would be to check the > "lower_user" option in radiusd.conf. > Freeradius has a few options for matching case > sensitivity in usernames > (and passwords). > > > -Rob > > > At 03:11 PM 11/24/2003 -0800, you wrote: > >Rob, > > > >Thanks. I doubled checked. The comma is there. > Sorry > >'bout that. > > > >I really have no clue what is going on here. The > >message indicate no password is present in the > >request, yet in the debug log is it shown. Here > >is a snippit of the log: > > > >Listening on IP address *, ports 1812/udp and > >1813/udp, with proxy on 1814/udp. > >Ready to process requests. > >rad_recv: Access-Request packet from host > >XX.XXX.XXX.XXX:33631, id=139, length=65 > > User-Name = "00022d-8152d8" > > User-Password = "blbb" > > NAS-IP-Address = 192.168.0.200 > > NAS-Port = 0 > >modcall: entering group authorize for request 0 > > modcall[authorize]: module "preprocess" returns > ok > >for request 0 > > modcall[authorize]: module "chap" returns noop > for > >request 0 > > modcall[authorize]: module "eap" returns noop > for > >request 0 > > rlm_realm: No '@' in User-Name = > "00022d-8152d8", > >looking up realm NULL > > rlm_realm: No such realm "NULL" > > modcall[authorize]: module "suffix" returns noop > for > >request 0 > > users: Matched DEFAULT at 153 > > modcall[authorize]: module "files" returns ok > for > >request 0 > > modcall[authorize]: module "mschap" returns noop > for > >request 0 > >modcall: group authorize returns ok for request 0 > > rad_check_password: Found Auth-Type Local > >auth: type Local > >auth: No password configured for the user > >auth: Failed to validate the user. > > > >Any ideas?????? > > > >Bill > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html __________________________________ Do you Yahoo!? Free Pop-Up Blocker - Get it now http://companion.yahoo.com/ - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
