Re: simple setup using users file

[Jean-Paul Chapalain]

Bill Schoolfield wrote:

Hi,

I'm using freeradius 0.9.3 on redhat 9.0. I'm trying
to get simple authentication working using the users
file. I have edited the client.conf and users file but
nothing else.

When running under debug, I can see the authentication
request come in and I have verified that the shared
secret is ok.

However, depending on how I edit the users file, I
either get:

auth: No password configured for user
or

auth: No authentication method (Auth-Type)
configuration found for the request: rejecting user

In the first case I have in the users file:

DEFAULT Auth-Type = Local
Fall-Through = Yes

000102-030405 Auth-Type := Local User-Password ==
"xxxx"

In the second case, I have the same without the DEFAULT entry.

The user name is a mac address from a wireless device.
Should it be in double quotes? What do I need to do to
get this simple case working?

Bill

__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/

- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

There is a comma after 'Local'.

See below a exemple of my users's file :
yyyyy   Auth-type := Local, User-Password == "xxxxx"
        Service-Type = NAS-Prompt-User

--
--  Jean-Paul Chapalain - GICM -  Reseaux et Systemes Distribues
--  32 rue Mirabeau - Le Relecq-Kerhuon - 29808 Brest Cedex 9, FRANCE
--  Tel +33298002873 - Fax +33298284005 - [EMAIL PROTECTED]
--  Key Fingerprint: 192C 1CFE F24A 050D F280 A086 AF15 8631 3ABB 4C7D

smime.p7s
Description: S/MIME Cryptographic Signature