hello everybody, I followed Ray McKay's HOWTO for FreeRadius with EAP/TLS-WinXP. My radius server is on the same machine as the access point (linux box running hostAP). When a wireless client (XP laptop) tries to connect, everything seems to go smoothly...Access-Accept packet is sent..etc. In the console running hostapd, I have the following:
. . . wlan0: STA 00:04:23:9a:59:1c IEEE 802.11: authenticated wlan0: STA 00:04:23:9a:59:1c IEEE 802.11: associated (aid 1) wlan0: STA 00:04:23:9a:59:1c IEEE 802.1X: authenticated wlan0: STA 00:04:23:9a:59:1c IEEE 802.11: disassociated It disassociates within 5 seconds. I get an ip address on the laptop, but only for 5 secs. A couple of times, It connected fine and there was not disconnection. I am using the same certificates...but sometimes it authenticates properly and other times it doesn't. Has somebody had this problem before? Any help is greatly appreciated. Thanks in advance. Regards, Bojan ____________________________________________________________ Find what you are looking for with the Lycos Yellow Pages http://r.lycos.com/r/yp_emailfooter/http://yellowpages.lycos.com/default.asp?SRC=lycos10 - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
