You will want something like this in your /usr/local/etc/raddb/users file.
testuser Auth-Type := Local, User-Password == "testuser",
Calling-Station-Id == "00-20-A6-4D-10-33"
Session-Timeout = 600,
Trapeze-VLAN-Name = "corp",
Filter-Id = "all-access.in"
Of course, some of your reply items will be different that the above. In
my case, I am using Trapeze wireless gear.
I have also seen MAC addresses sent to Radius in a few different formats
depending on the equipment used. For example, 0020A6-4D1033 versus
00-20-A6-4D-10-33, etc.
Good Luck.
Jason
On Fri, 5 Mar 2004, Burak Sarrafi wrote:
> Hi all,
>
> I've a single and simple question. I hope u can help me.
>
> I'm using Freeradiud and Cisco Cat series switch. I've done the
> configuration between freeradios and switch.
> Now using username & password auth. everythings is ok. But I want to
> check client's macaddress at radius server. Username + Password + Mac
> Address checking.
>
> How can I do ?
>
> Thanks from now.
>
> --
> Burak Sarrafi <[EMAIL PROTECTED]>
> Network Specialist
> Sabanci University / IT Dept.
> Tel:+90-216-4839180
> Fax:+90-216-4839186
>
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
