I am not sure if I was clear in my question, or?
Jason Peterson wrote:
You will want something like this in your /usr/local/etc/raddb/users file.
testuser Auth-Type := Local, User-Password == "testuser", Calling-Station-Id == "00-20-A6-4D-10-33" Session-Timeout = 600, Trapeze-VLAN-Name = "corp", Filter-Id = "all-access.in"
Of course, some of your reply items will be different that the above. In my case, I am using Trapeze wireless gear.
I have also seen MAC addresses sent to Radius in a few different formats depending on the equipment used. For example, 0020A6-4D1033 versus 00-20-A6-4D-10-33, etc.
Good Luck.
Jason
On Fri, 5 Mar 2004, Burak Sarrafi wrote:
Hi all,
I've a single and simple question. I hope u can help me.
I'm using Freeradiud and Cisco Cat series switch. I've done the configuration between freeradios and switch. Now using username & password auth. everythings is ok. But I want to check client's macaddress at radius server. Username + Password + Mac Address checking.
How can I do ?
Thanks from now.
-- Burak Sarrafi <[EMAIL PROTECTED]> Network Specialist Sabanci University / IT Dept. Tel:+90-216-4839180 Fax:+90-216-4839186
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
