Hi Alan, I assumed Freeradius is expecting an answer from the supplicant. Unfortunatelly, there's no option (or I do not know about it) to increase the verbosity and no error message whatsoever is logged.
I really do not know what to do - the strange thing is that - apparently - EAP/TLS does work and - afaik - the AP does not understand anything below the EAP message so it doesn't even know whether it's PEAP or TLS. Weird. Thanks for the quick response, Ionut ----- Original Message ----- From: "Alan DeKok" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, March 22, 2004 6:55 PM Subject: Re: SMC 2804WBR PEAP not working > "Ionut Nistor" <[EMAIL PROTECTED]> wrote: > > I am trying to configure a SMC 2804WBR (european V2) AP and an internal > > WiFi NIC on my laptop for WPA/PEAP network access. > > No matter what I tried, the login would fail. After dumping some network > > packets, it seems that, after the identity is sent Freeradius (in an > > access-request radius packet), it replies with the challenge but nothing > > happens afterwards. > > FreeRADIUS is waiting for the client to respond to the challenge. > > > Also, dumping packets on the wireless side, it seems that the challenge > > does not reach the NIC on the laptop. The login fails after ~10 seconds > > of inactivity. > > So the SMC box is tossing the challenge. If it's not logging any > message as to why, there's little you can do to debug the problem. > > The SMC box doesn't like something in the challenge packet. But > without logs, you can't figure out what it doesn't like. > > Alan DeKok. > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
