I sniffed both interfaces (the one on the FreeRadius machine and the WiFi on the client).
The sequence is this: packet sent from the AP to the NIC (identify) packet sent to the AP from the NIC (I am username) packet sent from the AP to FreeRadius (auth-request for username) packet sent from the FreeRadius to the AP (auth-challenge) silence :-) Ionut ----- Original Message ----- From: "Pavol Zibrita" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, March 23, 2004 3:41 PM Subject: Re: SMC 2804WBR PEAP not working > Hi ! > > > I assumed Freeradius is expecting an answer from the supplicant. > > Unfortunatelly, there's no option (or I do not know about it) to increase > > the verbosity and no error message whatsoever is logged. > > > > I really do not know what to do - the strange thing is that - apparently - > > EAP/TLS does work and - afaik - the AP does not understand anything below > > the EAP message so it doesn't even know whether it's PEAP or TLS. > > > > Weird. > > I wasn't able to get it run, but I haven't tried since then anything with > the smc, because I have to make other > things. But now I will try to look at it and I'll report what have I found > out. > > For example the first important question is, if the first message from > radius is send to client or the ap blocks it, or if the ap blocks the > clients reply to radius. I think I'll we be also possible to comapre the > packets with the cisco as ap, so maybe I can found what is the problem. > > P.Zibrita > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
