On Thu, 3 Jun 2004, Marco Marques wrote:
> Hi All ,
>
> i am trying to setup radius to work with ip pools , when i start radius in debug
> mode i dont see any error.
>
> Output :
> Module: Loaded IPPOOL
> ippool: session-db = "/usr/local/etc/raddb/db.ippool"
> ippool: ip-index = "/usr/local/etc/raddb/db.ipindex"
> ippool: range-start = 192.168.1.1 IP address [192.168.1.1]
> ippool: range-stop = 192.168.3.254 IP address [192.168.3.254]
> ippool: netmask = 255.255.255.0 IP address [255.255.255.0]
> ippool: cache-size = 800
> ippool: override = no
> Module: Instantiated ippool (main_pool)
> Listening on IP address *, ports 1812/udp and 1813/udp, with proxy on 1814/udp.
> Ready to process requests.
>
> the error comes when i try to authenticate gives me this error :
>
> auth: user supplied User-Password matches local User-Password
> modcall: entering group post-auth for request 0
> rlm_ippool: Could not find Pool-Name attribute.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Fix the above. The comments in radiusd.conf should be more than enough.
> modcall[post-auth]: module "main_pool" returns noop for request 0
> modcall: group post-auth returns noop for request 0
>
> how can i solve this problem??
>
> other question that i have is how to setup the users file to use a speciic pool?
>
> Best regards
>
> Marco
--
Kostas Kalevras Network Operations Center
[EMAIL PROTECTED] National Technical University of Athens, Greece
Work Phone: +30 210 7721861
'Go back to the shadow' Gandalf
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
