On Tue, 8 Jun 2004 [EMAIL PROTECTED] wrote: > > > Hi this is the debug with the error > > > ippool: ip-index = "/usr/local/etc/raddb/db.ipindex" > ippool: range-start = 192.168.1.1 IP address [192.168.1.1] > ippool: range-stop = 192.168.3.254 IP address [192.168.3.254] > ippool: netmask = 255.255.255.0 IP address [255.255.255.0] > ippool: cache-size = 800 > ippool: override = no > Module: Instantiated ippool (main_pool) > Listening on IP address *, ports 1812/udp and 1813/udp, with proxy on > 1814/udp. > Ready to process requests. > rad_recv: Access-Request packet from host 127.0.0.1:1029, id=126, length=57 > User-Name = "steve" > User-Password = "testing" > NAS-IP-Address = 255.255.255.255 > NAS-Port = 0 > modcall: entering group authorize for request 0 > modcall[authorize]: module "preprocess" returns ok for request 0 > modcall[authorize]: module "chap" returns noop for request 0 > modcall[authorize]: module "eap" returns noop for request 0 > rlm_realm: No '@' in User-Name = "steve", looking up realm NULL > rlm_realm: No such realm "NULL" > modcall[authorize]: module "suffix" returns noop for request 0 > users: Matched steve at 80
OK and *do* you set Pool-Name in line 80? > modcall[authorize]: module "files" returns ok for request 0 > modcall[authorize]: module "mschap" returns noop for request 0 > modcall: group authorize returns ok for request 0 > rad_check_password: Found Auth-Type Local > auth: type Local > auth: user supplied User-Password matches local User-Password > modcall: entering group post-auth for request 0 > rlm_ippool: Could not find Pool-Name attribute. > modcall[post-auth]: module "main_pool" returns noop for request 0 > modcall: group post-auth returns noop for request 0 > Sending Access-Accept of id 126 to 127.0.0.1:1029 > Framed-Protocol = PPP > Framed-Routing = Broadcast-Listen > Framed-Filter-Id = "std.ppp" > Framed-MTU = 1500 > Finished request 0 > Going to the next request > > > > On Mon, 7 Jun 2004 [EMAIL PROTECTED] wrote: > > > >> Hi > >> > >> when i run the server in debug mode i have this line that says that : > >> > >> modcall[post-auth]: module "main_pool" returns noop for request 0 > >> > >> how can i change the congif file in order for this to work? > >> > >> Best regards > > > > I think you will find the answer just one line before the line you posted > > (posting the complete session debug can help). > > > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > -- Kostas Kalevras Network Operations Center [EMAIL PROTECTED] National Technical University of Athens, Greece Work Phone: +30 210 7721861 'Go back to the shadow' Gandalf - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
