sorry, I've added the following into the users file.
Users File
DEFAULT Group == "Read-Access"
Cisco-AVPair == 'shell:priv-lvl=7',
User-Name = user1,
User-Name = user2
DEFAULT Group == "Full-Access"
Cisco-AVPair == 'shell:priv-lvl=15',
User-Name = user1,
User-Name = user2
user1 Auth-Type := Local, User-Password == "user1"
Service-Type = Framed-User,
Framed-Protocol = None
user2 Auth-Type := Local, User-Password == "user2"
Service-Type = Framed-User,
Framed-Protocol = None
superuser Auth-Type := Local, User-Password == "superuser"
Service-Type = Framed-User,
Cisco-AVPair = 'shell:priv-lvl=15',
Framed-Protocol = None
-----Original Message-----
From: Alan DeKok [mailto:[EMAIL PROTECTED]
Sent: 18 August 2004 15:42
To: [EMAIL PROTECTED]
Subject: Re: Creating Groups
Ryan Moreton <[EMAIL PROTECTED]> wrote:
> I've created a superuser login, which works fine, but it doesn't recognise
> any user in the groups I've created. Can somebody tell me what I've done
> wrong?
You didn't say where you created the groups.
Alan DeKok.
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
