Michael Griego wrote: > This is indeed true of the screwed up RADIUS implementation on the > AP-2000s. They do not report session time with the > Account-Session-Time attribute. They expect you to calculate it > after-the-fact based on the Start and Stop packet times. Oh well, > it's doable. > > This is another "feature" of the APs. For some reason, they do not > take the time to report the correct port in the Access Request > packets. They simply set it to 0. This is quite annoying. You do, > however, get the Called-Station-Id in the Access Request packets. > You DON'T get the Called-Station-Id in the ACCOUNTING packets (very > annoying), however you *do* get the correct Port ID. FYI, port 2 is > the card in slot A, port 9 is the card in slot B, and ports 3-8, > 10-15 are any WDS "virtual" ports for repeater-type environments. > Anyway, the fact that it does this should not affect anything in the > account as autz/auth and accounting are totally seperate functions. > It's just a large annoyance.
Luckily I don't use this device :) You might consider reporting your issues to the manufacturer. If they don't want to do anything about it, then you might consider throwing them out :) -- Regards, Thor Spruyt E: [EMAIL PROTECTED] W: www.thor-spruyt.com M: +32 (0)475 67 22 65 - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
