> >> Hi all,
> >>
> >> I am sure I saw somebody ask this recently, but I cannot find it. How
> >> can I setup radius to accept all requests from a particular NAS,
> based
> >> on the NAS ip address?
> >>
> >
> >DEFAULT NAS-IP-Address == 127.0.0.1, Auth-Type := Accept
> >
> >change 127.0.0.1 to the nas you want or add that nas to huntgroups and
> >change nas-ip-address to hungroup-name.
>
> I want to simply have one NAS's requests be authenticated, so do I put
> this information in the radreply table?
>
> e.g.
> insert INTO radreply (id, username, attribute, op, value) values
> ('1','10.1.0.9','Auth-Type',':=','Accept');
>
> ???
>The easiest way is to just add it to your users file, as I had shown above. Just put this on the top of your users file, replacing x.x.x.x with the IP of the NAS you want to accept. DEFAULT NAS-IP-Address == x.x.x.x, Auth-Type := Accept - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
