Hi, has someone ever ask Cisco about that "issue" ?! If yes what was the answer? Buy Cisco ASC server ?
Regards Holger > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On > > Behalf Of Jeffrey C. Ollie > > Sent: Monday, February 14, 2005 5:34 PM > > To: freeradius-users@lists.freeradius.org > > Subject: Re: Cisco WDS, WLSE and FreeRADIUS > > > > > > On Mon, 2005-02-14 at 13:55 +0100, Richard Timsit wrote: > > > On Fri, 2005-02-11 at 22:43, Jeffrey C. Ollie wrote: > > > > > > > > > > > However, I am still unable to get the WLSE to talk > > properly with the > > > > APs. I have recompiled with the patches mentioned above > > and the WDS > > > > AP shows that the WLSE is authenticated but things still aren't > > > > working properly (WLSE reports faults and is unable to > > control the > > > > APs). > > > > > > > > > > Once the patch applied, see the log an find such lines : > > > rlm_eap_leap: Stage 6 > > > rlm_eap: RT Modif EAP-Type = 17 EAP-LENGTH = XX > > > > > > If XX not equal to 30, modify the test of the patch eap.c > > accordingly. > > > > > > Freeradius authenticate the WLSE with this patch, not only on my > > > campus... > > > > Ok... I'm getting further now... The access points show > > "SECURITY KEYS SETUP" when you run "show wlccp wnm status". > > I had to change the length test to 31 in my copy of the patch > > (BTW, I'm running WLSE 2.9.1 and 12.3 (2)JA2 on my 1200 > > access points). Now I'll have to start doing some more > > playing around to see if everything is working. > > > > > > Jeff > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html