Hi,

We'd like to use FR to assign users on our wired network to one of 30
different vlans on campus, based on an LDAP field. Currently, we are doing
this with huntgroups. Namely, we create a huntgroup for the NAS (in our
case, a network switch), and then in the users file, we put the following:

DEFAULT Huntgroup-Name == mySWITCH1, Ldap-Group == staff
       User-Name=`%{User-Name}`,
       Tunnel-Private-Group-Id=176,
       Tunnel-Type=VLAN,
       Fall-Through = no

DEFAULT Huntgroup-Name == mySWITCH1, Ldap-Group == student
       User-Name=`%{User-Name}`,
       Tunnel-Private-Group-Id=177,
       Tunnel-Type=VLAN,
       Fall-Through = no
And so on...for other groups of user like faculty, admin, etc..

This seems to work. The issue is scale. I have would conceivably have to
have a huntgroup definition in the huntgroups file for each NAS. And if I
wanted 30 vlans, I'd have to have 30 definitions like the ones above in my
users file for EACH one of my NAS's.

I'm sure there's a simpler way of doing things that I'm missing. Any advice
is appreciated.

Thanks


Matt
[EMAIL PROTECTED] 



- 
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

Reply via email to