If this is already a known issue, forgive me - I did not find
anything in the archives or bug database that appeared relevant.
I'm trying to upgrade from FreeRADIUS 1.1.2 to 1.1.6 - building from
source on Debian Linux (sarge).
The build goes without a hitch, but when running the new version and
using the existing configuration files I get the following (relevant
output from 'radiusd -X'):
Module: Loaded preprocess
preprocess: huntgroups = "/s/freeradius-1.1/etc/raddb/huntgroups"
preprocess: hints = "/s/freeradius-1.1/etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
preprocess: with_alvarion_vsa_hack = no
/s/freeradius-1.1/etc/raddb/huntgroups: Parse error (check) for
entry snt-console: Unknown value 1-22 for attribute NAS-Port
rlm_preprocess: Error reading /s/freeradius-1.1/etc/raddb/huntgroups
radiusd.conf: preprocess: Module instantiation failed.
radiusd.conf Unknown module "preprocess".
radiusd.conf Failed to parse authorize section.
The section in the huntgroups file it is choking on is this:
snt-console NAS-IP-Address == aaa.bbb.ccc.ddd, NAS-Port == 1-22
If I comment that line out, it also chokes on this entry with a
slightly different error ( "=" expected):
nci-console NAS-IP-Address == aaa.bbb.ccc.ddd, NAS-Port == 1,25-32
So - did the syntax for huntgroups change or is this a real bug ? This
config works fine with 1.1.2 - I have not tried any of the versions
between 1.1.2 and 1.1.6 to narrow down the issue.
I can send the full debug output if needed but I didn't want to clobber
the list unnecessarily.
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html