Hi, I don't recommend you to use Debian Freeradius Package. It has been built without eap support. You have to rebuild from source.
Here is a good link here : http://www.linuxinsight.com/building-debian-freeradius-package-with-eap-tls-ttls-peap-support.html Regards. ---------------------------------------- Patrice OLIVER Chef du Projet Ville Hôpital Responsable Réseaux & Sécurité ---------------------------------------- HOSPICES CIVILS DE BEAUNE Service Informatique BP 104 21203 BEAUNE CEDEX Tél. 33 3 80 24 44 09 Fax 33 3 80 24 45 90 ---------------------------------------- -----Original Message----- From: build <[EMAIL PROTECTED]> To: "FreeRADIUS LIST" <[email protected]> Date: Wed, 21 Nov 2007 17:22:58 +1100 Subject: WPA HOWTO > G'day All, > Using Debian etch. I've started again with the WPA HOWTO at > http://wiki.freeradius.org/WPA_HOWTO > > It's a bit confusing with the eap.conf file separate to the > radiusd.conf but I thought I had got it right. I was wrong. > > :/# freeradius -X -A > Starting - reading configuration files ... > <snip> > rlm_eap: Failed to link EAP-Type/tls: rlm_eap_tls.so: cannot open > shared object file: No such file or directory > radiusd.conf[10]: eap: Module instantiation failed. > radiusd.conf[1940] Unknown module "eap". > radiusd.conf[1887] Failed to parse authenticate section. > cheval:/# find -name rlm_eap_tls.so > cheval:/# > > > Can anyone give me a hint before my PC goes through a closed window? > Thanking you in anticipation, > build > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
