If it don't work, you have to do the changes manually. I did it, it's not a long job to do.
Cordialement, ---------------------------------------- Patrice OLIVER Chef du Projet Ville Hôpital Responsable Réseaux & Sécurité ---------------------------------------- HOSPICES CIVILS DE BEAUNE Service Informatique BP 104 21203 BEAUNE CEDEX Tél. 33 3 80 24 44 09 Fax 33 3 80 24 45 90 ---------------------------------------- -----Original Message----- From: build <[EMAIL PROTECTED]> To: "FreeRadius users mailing list" <[email protected]> Date: Wed, 21 Nov 2007 18:10:22 +1100 Subject: Re: WPA HOWTO > G'day Oliver, > Thank you for that, no wonder :-( > However the build looks scary so I: > :/# patch -pl < freeradius-openssl.patch > patch: **** strip count l is not a number > :/# > > Is this easily fixed? > > Thanks in anticipation, > build > > > On 21/11/2007, OLIVER Patrice <[EMAIL PROTECTED]> wrote: > > Hi, > > > > I don't recommend you to use Debian Freeradius Package. It has been built > > without eap support. > > You have to rebuild from source. > > > > Here is a good link here : > > http://www.linuxinsight.com/building-debian-freeradius-package-with-eap-tls-ttls-peap-support.html > > > > Regards. > > > > ---------------------------------------- > > Patrice OLIVER > > Chef du Projet Ville Hôpital > > Responsable Réseaux & Sécurité > > ---------------------------------------- > > HOSPICES CIVILS DE BEAUNE > > Service Informatique > > BP 104 > > 21203 BEAUNE CEDEX > > > > Tél. 33 3 80 24 44 09 > > Fax 33 3 80 24 45 90 > > ---------------------------------------- > > > > > > -----Original Message----- > > From: build <[EMAIL PROTECTED]> > > To: "FreeRADIUS LIST" <[email protected]> > > Date: Wed, 21 Nov 2007 17:22:58 +1100 > > Subject: WPA HOWTO > > > > > G'day All, > > > Using Debian etch. I've started again with the WPA HOWTO at > > > http://wiki.freeradius.org/WPA_HOWTO > > > > > > It's a bit confusing with the eap.conf file separate to the > > > radiusd.conf but I thought I had got it right. I was wrong. > > > > > > :/# freeradius -X -A > > > Starting - reading configuration files ... > > > <snip> > > > rlm_eap: Failed to link EAP-Type/tls: rlm_eap_tls.so: cannot open > > > shared object file: No such file or directory > > > radiusd.conf[10]: eap: Module instantiation failed. > > > radiusd.conf[1940] Unknown module "eap". > > > radiusd.conf[1887] Failed to parse authenticate section. > > > cheval:/# find -name rlm_eap_tls.so > > > cheval:/# > > > > > > > > > Can anyone give me a hint before my PC goes through a closed window? > > > Thanking you in anticipation, > > > build > > > - > > > List info/subscribe/unsubscribe? See > > > http://www.freeradius.org/list/users.html > > - > > List info/subscribe/unsubscribe? See > > http://www.freeradius.org/list/users..html > > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
