Hi Ivan,
Thanks for the reply. I think its starting to sink in. :)
I have to test out how we'll do a bit of it, but I think I get the
jist of it. I don't see how any of the netmask, require_message_authenticator
or virtual_server fit into it... But since I wasn't using it anyway, I
won't push my luck. ;) (Unless for netmask your saying the nasname
could be 192.168.3.0/24)
Thanks, Tuc
>
> nasname on your AP goes into NAS-Identifier filed in access request.
> It's not the same as nasname in nas table which takes NAS IP or FQDN.
> You can put it in shortname filed. "Secret per NAS" = "Secret per NAS
> IP address".
>
> Ivan Kalik
> Kalik Informatika ISP
>
> Dana 11/4/2008, "Tuc at T-B-O-H.NET" <[EMAIL PROTECTED]> pi?e:
>
> >Hi,
> >
> > If I choose DNS name, and I don't fully qualify it,
> >does it follow the standard BIND rules of using the "domain"
> >setting, or going down the "search" path?
> >
> > Reason I'm trying to avoid the IP or the FQDN is that
> >I was hoping to use the nasname along with the secret in
> >the UAM program I'm using for a "Secret per NAS" situation.
> >The hotspots are already using just a nasname currently (Which
> >is just something like SBC-1427). (Then again, getting the
> >client to put all the NAS into DNS is going to be a tough
> >sell too)
> >
> > Thanks, Tuc
> >>
> >> IP address (or DNS name) goes into nasname field.
> >>
> >> Ivan Kalik
> >> Kalik Informatika ISP
> >>
> >>
> >> Dana 11/4/2008, "Tuc at T-B-O-H.NET" <[EMAIL PROTECTED]> pi?e:
> >>
> >> >Hi,
> >> >
> >> > I had actually kept this email in my queue to implement
> >> >someday. Today is someday. But I have a question.
> >> >
> >> > The config file contains IP addresses, which the nas.sql
> >> >doesn't. How do I sync up the format of the clients.conf with
> >> >the nas.sql?
> >> >
> >> >client nas_shortname {
> >> > ipaddr = ??????????
> >> > (or)
> >> > ipv6addr = ????????
> >> > netmask = ????????
> >> > secret = nas_secret
> >> > require_message_authenticator = ????????
> >> > shortname = nas_shortname
> >> > nastype = nas_type
> >> > virtual_server = ????????
> >> >}
> >> >
> >> > Thanks, Tuc
> >> >>
> >> >> Hi,
> >> >>
> >> >> in sql.conf it says:
> >> >>
> >> >> Set readclients to 'yes' to read radius clients from the database
> >> >> ('nas' table)
> >> >> Clients will ONLY be read on server startup. For performance
> >> >> and security reasons, finding clients via SQL queries CANNOT
> >> >> be done "live" while the server is running.
> >> >>
> >> >> Best,
> >> >> Walter
> >> >>
> >> >>
> >> >> Am 22.01.2008 um 19:30 schrieb Pawel Cieplinski:
> >> >>
> >> >> > Hi there
> >> >> >
> >> >> >
> >> >> >
> >> >> > Everything works fine so far, but after adding a new NAS to DB,
> >> >> > radius server need restart to read this data, I am trying to
> >> >> > manipulate nas list without restarting freeradius, but due to lack
> >> >> > od documentation could you help me with that please.
> >> >> >
> >> >> >
> >> >> >
> >> >> > Pawel Cieplinski
> >
> >
> >
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
>
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
