Hello,
- Anyone can point me in the right direction if I am getting this error,
from the client:
"CTRL-EVENT-EAP-FAILURE EAP authentication failed"
- And on the freeradius console I have this:
Called-Station-Id = "00-20-a6-64-c3-b1:MVG-Personal"
Calling-Station-Id = "00-0f-cb-f9-3b-f9;MVG-Personal"
NAS-Identifier = "MVG-1"
State = 0x73e4f46973e6f0393091c54faaf880fd
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x020200060315
Message-Authenticator = 0x330b306447495e1a49cd5c7cfe5c1c6d
+- entering group authorize
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
rlm_realm: No '@' in User-Name = "easy", looking up realm NULL
rlm_realm: No such realm "NULL"
++[suffix] returns noop
rlm_eap: EAP packet type response id 2 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns notfound
users: Matched entry easy at line 90
expand: Hello, %{User-Name} -> Hello, easy
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
rlm_pap: Found existing Auth-Type, not changing it.
++[pap] returns noop
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
+- entering group authenticate
rlm_eap: Request found, released from the list
rlm_eap: EAP NAK
rlm_eap: EAP-NAK asked for EAP-Type/ttls
rlm_eap: processing type tls
rlm_eap_tls: Initiate
rlm_eap_tls: Start returned 1
++[eap] returns handled
Reply-Message = "Hello, easy"
EAP-Message = 0x010300061520
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x73e4f46972e7e1393091c54faaf880fd
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
Cleaning up request 0 ID 153 with timestamp +279
Cleaning up request 1 ID 154 with timestamp +279
Ready to process requests.
- And the client don't get an IP address, guessing it has something to do
with EAP authentication "No EAP Start".
Thanks very much for help!
Best regards,
Johan Nyman
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
