Greetings! I have a suggestion ,If you want to see if the packets are getting to the host try running
tcp -X udp also tcpdump -X host <hostname> then try a request and see if the packets show up. On Sun, Oct 19, 2008 at 7:38 PM, saman saman <[EMAIL PROTECTED]> wrote: > > HI Alan, > what If radtest localhost also doesn't work either? > here the iptables output > #iptables -L -n > Chain INPUT (policy DROP) > target prot opt source destination > ACCEPT all -- 127.0.0.1 0.0.0.0/0 > ACCEPT all -- 192.168.1.2 0.0.0.0/0 > ACCEPT all -- 192.168.0.10 0.0.0.0/0 > ACCEPT all -- 192.168.0.0/24 0.0.0.0/0 > ACCEPT all -- 0.0.0.0/0 192.168.1.0/24 > ACCEPT all -- .0.0.0/0 192.168.1.2 state > RELATED,ESTABLISHED > svr1 tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:21 > svr1 tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 > srv1 tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 > srv1 tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 > svr1 tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:110 > svr1 tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:113 > ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:1812 > ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:1813 > ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:1814 > ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:53 > ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:110 > ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:2074 > ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:4000 > ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 > ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 11 > ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 80 > > Chain FORWARD (policy DROP) > target prot opt source destination > ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 > ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 > ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state > RELATED,ESTABLISHED > > Chain OUTPUT (policy DROP) > target prot opt source destination > ACCEPT all -- 127.0.0.1 0.0.0.0/0 > ACCEPT all -- 192.168.0.10 0.0.0.0/0 > ACCEPT all -- 192.168.1.2 0.0.0.0/0 > ACCEPT all -- 192.168.1.206 0.0.0.0/0 > > Chain mars (6 references) > target prot opt source destination > ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp > flags:0x16/0x02 > ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state > RELATED,ESTABLISHED > DROP tcp -- 0.0.0.0/0 0.0.0.0/0 > > #radtest John hello localhost 0 testing > User-Name = "John" > User-Password = "hello" > NAS-IP-Address = 192.168.1.2 > NAS-Port = 0 > User-Name = "John" > User-Password = "hello" > NAS-IP-Address = 192.168.1.2 > NAS-Port = 0 > User-Name = "John" > User-Password = "hello" > NAS-IP-Address = 192.168.1.2 > NAS-Port = 0 > User-Name = "John" > User-Password = "hello" > NAS-IP-Address = 192.168.1.2 > NAS-Port = 0 > User-Name = "John" > User-Password = "hello" > NAS-IP-Address = 192.168.1.2 > NAS-Port = 0 > User-Name = "John" > User-Password = "hello" > NAS-IP-Address = 192.168.1.2 > NAS-Port = 0 > > The above iptables output shows the udp 1812, 1813 & 1814 are all accepted. > > > > Hi I am a newbie and recently would like to try to experience > freeradius-server-2.0.4 but unfortunately I have problems can't solved. > > > The freeradius is running ok but when attempt to authenticate the > server is just not responding to clients request. > > ... > > > #radiusd -X > > ... > > > Ready to process requests. > > > > The point of debug mode is to show it processing packets. > > > > If you've sent it packets and it doesn't receive them, fix the > > firewall on your OS to allow RADIUS packets. > > > > Alan DeKok. > > - > > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > _________________________________________________________________ > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html >
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
