>It is "other" both in the localhost client and in the client I created >to test using radiustest. > >I have, it shows 5 sessions for this user. > >mysql> SELECT COUNT(*) FROM radacct WHERE UserName='yellowhousejake' >AND AcctStopTime = 0; >+----------+ >| COUNT(*) | >+----------+ >| 5 | >+----------+ >1 row in set (0.00 sec) > >> - send Access-Request > >Changed Packet-Type to Access-Request, auth is approved. > >--------------------10/27/2008 2:26:27 PM Test started >[check_simul]------------------------- >Info:Sending Access-Request of id 0 to 10.0.241.95:1645 > User-Name = "yellowhousejake" > User-Password = "marlin" >Info: Access-Accept packet from host 10.0.241.95:1645, id=0, length=89 > Service-Type = Framed-User > Framed-Protocol = PPP > Framed-IP-Address = 255.255.255.254 > Framed-IP-Netmask = 255.255.255.255 > Framed-Routing = None > Framed-Compression = Van-Jacobson-TCP-IP > Filter-Id = "std.ppp" > Framed-MTU = 1500 > Port-Limit = 1 > Idle-Timeout = 600 > Session-Timeout = 28800 > > Total approved auths: 1 > Total denied auths: 0 > Total lost auths: 0 > Total time(secs): 0 > >Since I am testing with a test client from my laptop, and using radtest >on the radius server (localhost), and using only accounting data to >check for simultaneous use, does checkrad even come into play? >
Not when nastype is set to "other". Post the debug (radiusd -X). And user/group entry (where is Simultaneous-Use set). Ivan Kalik Kalik Informatika ISP - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
