On 14/05/2011 12:55, Alan DeKok aland-at-deployingradius.com
|freeradius-mailinglist| wrote:
[email protected] wrote:
Using freeradius 1.1.3.
Upgrade.
My apologies, I made a mistake, the version is 2.1.7
Im trying to get freeradius to return a helpful
reply-message in access-rejects to the NAS but the reply-message seems
to get stripped from the access-reject packet. Ive configured the
reply-message as below in /etc/raddb/sites-enabled/default
Huh? 1.1.3 doesn't have "sites-enabled".
Figure out what you're doing. You won't be able to understand
anything until then.
Using wireshark on the radius server,
<sigh>
I have no idea why some people are deathly opposed to running the
server in debugging mode.
I'm not at all, I've run it in debugging mode and I can see the
reply-message as below. I just wanted to make sure the packets on the
wire were as expected.
Sending Access-Reject of id 184 to 10.0.2.3 port 45566
Reply-Message = "Login Failure"
However, on the receiving NAS, using wireshark, there is no
reply-message AVP!
The packets are from different login attempts.
Im confused, the Packet identifier is the same. Can you explain how you
know this. Thanks, much appreciated!
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
