Rafal Kaminski wrote: > I have problem with users which type 2-3 times bad password. > > In debug mode i have something like this: > > Fri May 27 16:11:01 2011 : Info: [peap] The users session was previously > rejected: returning reject (again.) > Fri May 27 16:11:01 2011 : Info: [peap] *** This means you need to read the > PREVIOUS messages in the debug output > Fri May 27 16:11:01 2011 : Info: [peap] *** to find out the reason why the > user was rejected. > Fri May 27 16:11:01 2011 : Info: [peap] *** Look for "reject" or "fail". > Those earlier messages will tell you. > Fri May 27 16:11:01 2011 : Info: [peap] *** what went wrong, and how to fix > the problem. > > All is fine if users put good password and auth. with LDAP. But some times > they made some typo :( > > I tried read all line in debug mode, how is write here, but I have one > question: > > - Is there any possible to remove/clean this cache?
There is no cache. That message means you need to READ THE DEBUG OUTPUT. The reason for rejecting the user is IN THE DEBUG OUTPUT. > I set in eap.conf - cache enable=on and lifetime = 1 hours, but nothing. Because that does nothing to solve this problem. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
