> Rafal Kaminski wrote: >> I have problem with users which type 2-3 times bad password. >> >> In debug mode i have something like this: >> >> Fri May 27 16:11:01 2011 : Info: [peap] The users session was previously >> rejected: returning reject (again.) >> Fri May 27 16:11:01 2011 : Info: [peap] *** This means you need to read the >> PREVIOUS messages in the debug output >> Fri May 27 16:11:01 2011 : Info: [peap] *** to find out the reason why the >> user was rejected. >> Fri May 27 16:11:01 2011 : Info: [peap] *** Look for "reject" or "fail". >> Those earlier messages will tell you. >> Fri May 27 16:11:01 2011 : Info: [peap] *** what went wrong, and how to fix >> the problem. >> >> All is fine if users put good password and auth. with LDAP. But some times >> they made some typo :( >> >> I tried read all line in debug mode, how is write here, but I have one >> question: >> >> - Is there any possible to remove/clean this cache? > > There is no cache. That message means you need to READ THE DEBUG OUTPUT. > > The reason for rejecting the user is IN THE DEBUG OUTPUT. > >> I set in eap.conf - cache enable=on and lifetime = 1 hours, but nothing. > > Because that does nothing to solve this problem. > > Alan DeKok. > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Ok. I read the OUTPUT and nothing :( Two person with good username and good password had REJECT but on this same PC when i put another user it was ok :( This is very confused for me. Thanks for help. Best, Rafal Kaminski - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
