Here is an example of two flows, one for management of the CPE and one for data:
Alvarion-R3-IF-Name += MGMT_PrivateIP Alvarion-PDFID += 1 WiMAX-Packet-Data-Flow-Id += 1 WiMAX-Service-Data-Flow-Id += 1 WiMAX-Direction += 3 WiMAX-Transport-Type += 1 WiMAX-Uplink-QOS-Id += 1 WiMAX-Downlink-QOS-Id += 1 WiMAX-ClassifierID += 1 WiMAX-Classifier-Priority += 1 WiMAX-Classifier-Direction += 1 WiMAX-IP-TOS-DSCP-Range-and-Mask += 0x1818FF WiMAX-Transport-Type += 1 WiMAX-ClassifierID += 2 WiMAX-Classifier-Priority += 1 WiMAX-Classifier-Direction += 2 WiMAX-IP-TOS-DSCP-Range-and-Mask += 0x0000FF WiMAX-QoS-Id += 1 WiMAX-Schedule-Type += 2 WiMAX-Traffic-Priority += 1 WiMAX-Maximum-Sustained-Traffic-Rate += 1024000 Alvarion-R3-IF-Name += VPLS Alvarion-PDFID += 21 Alvarion-PDFID += 22 WiMAX-Packet-Data-Flow-Id += 21 WiMAX-Service-Data-Flow-Id += 21 WiMAX-Direction += 1 WiMAX-Transport-Type += 3 WiMAX-Uplink-QOS-Id += 2 WiMAX-Downlink-QOS-Id += 2 WiMAX-ClassifierID += 3 WiMAX-Classifier-Priority += 1 WiMAX-Classifier-Direction += 1 WiMAX-VLAN-ID += 25 WiMAX-QoS-Id += 2 WiMAX-Schedule-Type += 2 WiMAX-Traffic-Priority += 1 WiMAX-Maximum-Sustained-Traffic-Rate += 10240000 WiMAX-Packet-Data-Flow-Id += 22 WiMAX-Service-Data-Flow-Id += 21 WiMAX-Direction += 2 WiMAX-Transport-Type += 3 WiMAX-Uplink-QOS-Id += 3 WiMAX-Downlink-QOS-Id += 3 WiMAX-ClassifierID += 4 WiMAX-Classifier-Priority += 1 WiMAX-Classifier-Direction += 2 WiMAX-VLAN-ID += 25 WiMAX-QoS-Id += 3 WiMAX-Schedule-Type += 2 WiMAX-Traffic-Priority += 1 WiMAX-Maximum-Sustained-Traffic-Rate += 25000000 -----Original Message----- From: freeradius-users-bounces+davidp=wirelessconnections....@lists.freeradius.org [mailto:freeradius-users-bounces+davidp=wirelessconnections.net@lists.freera dius.org] On Behalf Of Sven Tantau Sent: Thursday, December 20, 2012 2:04 PM To: [email protected] Subject: Re: Sub-TLVs how to have the same kind of descriptor twice Hi David, thanks for your quick reply. On 12/20/2012 03:35 PM, David Peterson wrote: > You follow the dictionary in the order set inside of it. The dictionary: ATTRIBUTE WiMAX-QoS-Descriptor 29 tlv ATTRIBUTE WiMAX-QoS-Id 29.1 byte ATTRIBUTE WiMAX-Global-Service-Class-Name 29.2 string # 6 octets ATTRIBUTE WiMAX-Service-Class-Name 29.3 string ATTRIBUTE WiMAX-Schedule-Type 29.4 byte ATTRIBUTE WiMAX-Traffic-Priority 29.5 byte ATTRIBUTE WiMAX-Maximum-Sustained-Traffic-Rate 29.6 integer ATTRIBUTE WiMAX-Minimum-Reserved-Traffic-Rate 29.7 integer ATTRIBUTE WiMAX-Maximum-Traffic-Burst 29.8 integer ATTRIBUTE WiMAX-Tolerated-Jitter 29.9 integer ATTRIBUTE WiMAX-Maximum-Latency 29.10 integer ATTRIBUTE WiMAX-Reduced-Resources-Code 29.11 byte ATTRIBUTE WiMAX-Media-Flow-Type 29.12 byte ATTRIBUTE WiMAX-Unsolicited-Grant-Interval 29.13 short ATTRIBUTE WiMAX-SDU-Size 29.14 short ATTRIBUTE WiMAX-Unsolicited-Polling-Interval 29.15 short ATTRIBUTE WiMAX-Media-Flow-Description-SDP 29.16 string One of my QoS flows: > WiMAX-QoS-Id+=2, > WiMAX-Schedule-Type+=2, > WiMAX-Traffic-Priority+=1, > WiMAX-Maximum-Sustained-Traffic-Rate+=128000, Since I get good results if I use only one QOS profile, I assume that I can skip attributes and that I'm not required to use them all. (Please correct me if I'm wrong.) > Once you hit the > end of your list of attributes the QoS profile is complete. And this is the part that I do not understand: If I continue by using a second QoS profile: > WiMAX-QoS-Id+=3, > WiMAX-Schedule-Type+=2, > WiMAX-Traffic-Priority+=1, > WiMAX-Maximum-Sustained-Traffic-Rate+=128000 I expected freeradius to see that WiMAX-QoS-Id is an element of a new tlv. And then create a new WiMAX-QoS-Descriptor for it. (Instead of combining the data for the two QoS profiles into one WiMAX-QoS-Descriptor.) Is my ASN violating some standard by not accepting one WiMAX-QoS-Descriptor containing data from two QoS profiles? If that is the case, is there another workaround beside putting something between the two QoS profiles? (This is what I did by adding "Acct-Interim-Interval+=60".) Thanks, best regards, Sven -- Internet Technologies Angola / Systems Department Tel: +244 (227) 286 000 / (924) 770 290 / (924) 770 291 Skype: internet-technologies-angola Mobile: +244 931 696413 Mail: [email protected] - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
<<attachment: winmail.dat>>
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
