Yeah he is trying to use VPLS with an Alvarion ASN. He is going to have to use the master branch.
David -----Original Message----- From: freeradius-users-bounces+davidp=wirelessconnections....@lists.freeradius.org [mailto:freeradius-users-bounces+davidp=wirelessconnections.net@lists.freera dius.org] On Behalf Of Alan DeKok Sent: Thursday, December 20, 2012 2:15 PM To: FreeRadius users mailing list Subject: Re: Sub-TLVs how to have the same kind of descriptor twice Sven Tantau wrote: > The dictionary: Yes... there's no need to re-post it here. We all have access to it. > Since I get good results if I use only one QOS profile, I assume that > I can skip attributes and that I'm not required to use them all. > (Please correct me if I'm wrong.) You don't need to use them all. > If I continue by using a second QoS profile: > >> WiMAX-QoS-Id+=3, >> WiMAX-Schedule-Type+=2, >> WiMAX-Traffic-Priority+=1, >> WiMAX-Maximum-Sustained-Traffic-Rate+=128000 > > I expected freeradius to see that WiMAX-QoS-Id is an element of a new > tlv. And then create a new WiMAX-QoS-Descriptor for it. (Instead of > combining the data for the two QoS profiles into one > WiMAX-QoS-Descriptor.) IIRC, it should create two descriptors. Which version are you using? For a lot of the weirder WiMAX stuff, you'll need to use the "master" branch. > Is my ASN violating some standard by not accepting one > WiMAX-QoS-Descriptor containing data from two QoS profiles? No idea. The WiMAX specs are thousands of pages long. It's a miracle it works at all. > If that is the case, is there another workaround beside putting > something between the two QoS profiles? (This is what I did by adding > "Acct-Interim-Interval+=60".) If that works... do it. Note that you *can* use a non-packet attribute. e.g. Tmp-String-0 += "blah" It doesn't have to be a "real" attribute. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
<<attachment: winmail.dat>>
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
