On 4 Jul 2013, at 13:12, Gustavo Vieira Oliveira <[email protected]> wrote:
> Hello! > > We have a Cisco Wireless Controller 5508 with Aironet 1041 APs. > > To make the AP authenticate with RADIUS we need to set the following command > manually in the AP: > > - radius-server vsa send > > Which as explained by cisco does the following: > > Command > > Purpose > > Router(config)# radius-server vsa send [accounting | authentication] > > > Enables the network access server to recognize and use VSAs as defined by > RADIUS IETF attribute 26. > > > The thing is, the APs can only authenticate if this command is issued in the > AP by cli and we need that the Wireless Controller can pass this > configuration to the APs, which it doesn't support. So, anyone know why is it > necessary and if there is another alternative or workaround to make it work > without it? > > Nowadays we schedule a script to log in the AP and run the command. This is FreeRADIUS related how? Arran Cudbard-Bell <[email protected]> FreeRADIUS Development Team - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
