Hi, This isn't a FreeRADIUS issue, and shouldn't really be on this list.
However - On Thu, Jul 04, 2013 at 09:12:40AM -0300, Gustavo Vieira Oliveira wrote: > We have a Cisco Wireless Controller 5508 with Aironet 1041 APs. We have the same, authenticating against FreeRADIUS. > To make the AP authenticate with RADIUS we need to set the following > command manually in the AP: > > - radius-server vsa send That is odd, and I would guess that you have something not set up correctly on the controller (I assume your APs are all lightweight and correctly joined to the controller). It all works fine here with no manual configuration of the APs at all - they get all their config from the controller, as they should do. The APs don't do any RADIUS themselves - it's all handled from the controller. So I can't understand why they would need to know anything about RADIUS attributes. > The thing is, the APs can only authenticate if this command is > issued in the AP by cli and we need that the Wireless Controller can > pass this configuration to the APs, which it doesn't support. So, > anyone know why is it necessary and if there is another alternative > or workaround to make it work without it? I would check that your WLANs are correctly configured with the RADIUS servers in the controller. You shouldn't need to configure the APs like this. You're better off asking on another mailing list, though. Matthew -- Matthew Newton, Ph.D. <[email protected]> Systems Specialist, Infrastructure Services, I.T. Services, University of Leicester, Leicester LE1 7RH, United Kingdom For IT help contact helpdesk extn. 2253, <[email protected]> - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
