Hi James,

The need for just such a box has been discussed at the Hamvention, and
we also dreamed up the microphone form factor.  It would need a patch
cable or jumper system to interface with the various mic/spkr and PTT
standards.

Inside we would need some sort of 32 bit processor, but perhaps not a
full Linux machine.

It would make (open source) Digital Voice available on any legacy HF SSB
or VHF FM radio without a PC, and be completely open and hackable.

Major work between where are today and that is a fixed point port of
Codec 2.  I've got some thoughts on how I can delegate that work more
effectively, e.g. automated unit tests that will show pass/fail on any
modified code.

Cheers,

David

On Mon, 2012-05-21 at 08:07 -0400, James Hall wrote:
> You know, if we use stuff meant for cellphones like
> very miniaturized ARM processors then it should be possible to make a
> codec2 mic for HT/mobile radios. Such a mic for an HT would need it's
> own battery but for many mobile radios could run off of provided
> power. I'm also, slowly, trying to figure out the Remote Control
> protocol for older Kenwood TM-xx1 radios so something could be
> produced that could be more tightly integrated into those radios.
> Kinda like the newer Kenwood D710 APRS head that can be used to
> upgrade one of their newer radios (What is it, DM71a?)
> 
> 
> James
> N9XLC
> 
> On Sun, May 20, 2012 at 11:52 PM, Bruce Perens <[email protected]>
> wrote:
>         On 05/20/2012 08:04 PM, Matthew Pitts wrote:
>         > Bruce,
>         >
>         
>         > Being able to use an existing transceiver to use a new mode
>         is something a lot of hams are willing to do; in fact, I've
>         seen numerous comments on various lists that indicate it's a
>         lot more common than we think.
>         
>         Well, sure. But putting an SSB operator on PSK, WSPR, or
>         Codec2 brings
>         previously-unavailable functionality to the radio. If you want
>         to do
>         that with VHF/UHF hams, give them a way to convert their FM
>         HTs to
>         Codec2 (like our HF modem, over an FM audio channel). That is
>         adding
>         real functionality, even if it's not running our system as
>         well as we
>         potentially can.
>         
>             Thanks
>         
>             Bruce
>         
>         
> ------------------------------------------------------------------------------
>         Live Security Virtual Conference
>         Exclusive live event will cover all the ways today's security
>         and
>         threat landscape has changed and how IT managers can respond.
>         Discussions
>         will include endpoint security, mobile security and the latest
>         in malware
>         threats.
>         http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
>         _______________________________________________
>         Freetel-codec2 mailing list
>         [email protected]
>         https://lists.sourceforge.net/lists/listinfo/freetel-codec2
>         
> 
> 
> ------------------------------------------------------------------------------
> Live Security Virtual Conference
> Exclusive live event will cover all the ways today's security and 
> threat landscape has changed and how IT managers can respond. Discussions 
> will include endpoint security, mobile security and the latest in malware 
> threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
> _______________________________________________ Freetel-codec2 mailing list 
> [email protected] 
> https://lists.sourceforge.net/lists/listinfo/freetel-codec2



------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
Freetel-codec2 mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freetel-codec2

Reply via email to