Hi Leon
I am pretty busy, and I am an Altium shop, but I can look at it, send
direct,.... if I can import it.
glen VK1XX
On 11/03/2018 1:38 AM, Leon Lessing wrote:
I should have rephrased it, the SM1002 :)
I looked at this canbus thing and I thought to myself "self this is
trouble" so canbus no more, only modbus, very creative rx/tx
switching, can bite you in the backside though.
The board is getting very big, as I have the hotspot design for the pi
hat, I am going to panelbeat that into a modbus unit, and there we
have a gmsk, 2fsk and 4fsk radio.
I used molex 43025/43045 connectors for the rs485 and for the audio,
wanted to use a db9 but it just takes too much space, I am a bit
worried with my long audio wires.
I the lower right I am thinking of sticking a rj45 conenctor block for
a universal mic interface like the original SM1000.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Freetel-codec2 mailing list
Freetel-codec2@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freetel-codec2
