I'am exactly in the same situation than Scott (mplayer works fine with dfbmga, etc etc) except the sdl patch didn't apply with no errors (I had to enter the file path manually) et I have a PAL tv (520x476) and Freevo doesn(t to appear on my tv screen :/
----- Original Message ----- From: "R. Scott Baer" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, July 09, 2003 3:41 PM Subject: Re: [Freevo-users] Re: freevo app on tv-out using directfb > Sorry for the delay... we had some huge storms pass threw.. and I was > without power for a little under 24hrs... > > > Ok, let's just double check: > > > 1. You have patched SDL with the patch from CVS > > Yes.. though the patch was for 1.2.4, and I'm useing 1.2.5. > The patch aplied fine, with not failed chunks. > > > 2. You're running Freevo as root and have "dfbmga" and "720x480" in > > freevo.conf in the appropriate spots > > Yes, yes and yes... > > > I also was only able to get it to work by installing the i2c-dev > > module, and I used the fusion device from directfb... > > Hmmmm.. I looked for the i2c-dev, and it was not in my > /lib/modules/2.4..../kernel/driver/i2c/ dir > > I was sure I build this, and still have the source dir where I built the > kernel. And it was their, I looked at the .config file, and it was selected > to build. > > I have the following in the ../i2c/ > > i2c-dev.h > i2c-dev.o > > I tried coping the i2c-dev.o file over to my > /lib/modules/2.4..../kernel/driver/i2c/ ..but that did not work. > > Frustrated, I built another kernel... with all the DirectFB patches... > double checked my config... before building. > make clean > make mrproper > make clean --not sure if this is nessasary > make menuconfig --or xconifg if X is running > make dep > vi Makefile and edit EXTRAVERSION = -19.8.0_Blah_Blah_Blah > make bzImage # > make modules # make bzImage & modules are done at the same time (two > terminals) > make modules_install > cp bzImage to /boot > /sbin/mkinitrd /boot/initrd-19.8.0_Blah_Blah_Blah 19.8.0_Blah_Blah_Blah > edit grub > reboot into new kernel > > Same result.. it did not install the i2c-dev module. > > Now I'm stumped.. > > Any one out their using the stock RH9 kernel config, that could diff it for > me with the DirectFB stuff, or just send me the .config file that you used > with a RH9 system. (I'm would like to use a stock RH9 config file, with > only the changes necessary for DirectFB to work with freevo) > > Is their a place and the site were people could upload/download .config > files for different distributions / version ??? > > Scott > > > > ------------------------------------------------------- > This SF.Net email sponsored by: Parasoft > Error proof Web apps, automate testing & more. > Download & eval WebKing and get a free book. > www.parasoft.com/bulletproofapps > _______________________________________________ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users ------------------------------------------------------- This SF.Net email sponsored by: Parasoft Error proof Web apps, automate testing & more. Download & eval WebKing and get a free book. www.parasoft.com/bulletproofapps _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
