PAL should be 720x576 shouldn't it? On Wed, Jul 09, 2003 at 04:02:45PM +0200, David Amiel wrote: > I'am exactly in the same situation than Scott (mplayer works fine with > dfbmga, etc etc) except the sdl patch didn't apply with no errors (I had to > enter the file path manually) et I have a PAL tv (520x476) and Freevo > doesn(t to appear on my tv screen :/ > > > > > > ----- Original Message ----- > From: "R. Scott Baer" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, July 09, 2003 3:41 PM > Subject: Re: [Freevo-users] Re: freevo app on tv-out using directfb > > > > Sorry for the delay... we had some huge storms pass threw.. and I was > > without power for a little under 24hrs... > > > > > Ok, let's just double check: > > > > > 1. You have patched SDL with the patch from CVS > > > > Yes.. though the patch was for 1.2.4, and I'm useing 1.2.5. > > The patch aplied fine, with not failed chunks. > > > > > 2. You're running Freevo as root and have "dfbmga" and "720x480" in > > > freevo.conf in the appropriate spots > > > > Yes, yes and yes... > > > > > I also was only able to get it to work by installing the i2c-dev > > > module, and I used the fusion device from directfb... > > > > Hmmmm.. I looked for the i2c-dev, and it was not in my > > /lib/modules/2.4..../kernel/driver/i2c/ dir > > > > I was sure I build this, and still have the source dir where I built the > > kernel. And it was their, I looked at the .config file, and it was > selected > > to build. > > > > I have the following in the ../i2c/ > > > > i2c-dev.h > > i2c-dev.o > > > > I tried coping the i2c-dev.o file over to my > > /lib/modules/2.4..../kernel/driver/i2c/ ..but that did not work. > > > > Frustrated, I built another kernel... with all the DirectFB patches... > > double checked my config... before building. > > make clean > > make mrproper > > make clean --not sure if this is nessasary > > make menuconfig --or xconifg if X is running > > make dep > > vi Makefile and edit EXTRAVERSION = -19.8.0_Blah_Blah_Blah > > make bzImage # > > make modules # make bzImage & modules are done at the same time (two > > terminals) > > make modules_install > > cp bzImage to /boot > > /sbin/mkinitrd /boot/initrd-19.8.0_Blah_Blah_Blah 19.8.0_Blah_Blah_Blah > > edit grub > > reboot into new kernel > > > > Same result.. it did not install the i2c-dev module. > > > > Now I'm stumped.. > > > > Any one out their using the stock RH9 kernel config, that could diff it > for > > me with the DirectFB stuff, or just send me the .config file that you used > > with a RH9 system. (I'm would like to use a stock RH9 config file, with > > only the changes necessary for DirectFB to work with freevo) > > > > Is their a place and the site were people could upload/download .config > > files for different distributions / version ??? > > > > Scott > > > > > > > > ------------------------------------------------------- > > This SF.Net email sponsored by: Parasoft > > Error proof Web apps, automate testing & more. > > Download & eval WebKing and get a free book. > > www.parasoft.com/bulletproofapps > > _______________________________________________ > > Freevo-users mailing list > > [EMAIL PROTECTED] > > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > > ------------------------------------------------------- > This SF.Net email sponsored by: Parasoft > Error proof Web apps, automate testing & more. > Download & eval WebKing and get a free book. > www.parasoft.com/bulletproofapps > _______________________________________________ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users
------------------------------------------------------- This SF.Net email sponsored by: Parasoft Error proof Web apps, automate testing & more. Download & eval WebKing and get a free book. www.parasoft.com/bulletproofapps _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
